Cannot pairing
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,there is an tl_wpa4220 kit model powerline in my house, since we have renovated our house, some socket has been duplicated from the wall line and now this powerline adapter matches the adapter connected to modem for a while then the pair lights starts to blink and its not paired again.how can i solve this problem but powerline adaptor working nut duplicated socket
It does sound like a fault in that specific laptop, I would say a surge protected is unlikely to make any difference but worth a try.
My gut feeling however is that its a faulty NIC port on that laptop, not common but have seen it happen before. You could try changing some of the settings in the onfig, say force it to 100mbps rather than autodetect and see if that works..
Honestly you would be better with just a replacement USB3 to Ethernet adaptor if its the port itself, used this one below before with no issues and decent speeds.
https://www.amazon.co.uk/Anker-Portable-Ethernet-Supporting-Notebook-Black-USB-3-0/dp/B00NPJP33M