802.11ax only mode doesn't work on RE505X
Hello,
I have set "802.11ax only" mode on my RE505X in Access Point mode. But more older 802.11ac devices still connect to the AP.
@TP-Link could you please take a look? It seems we have a bug here.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you very much for your detailed information.
We would like to forward your case to the senior engineers and please have a check of your email box later.
By the way, what is the model number of this device?
Is it the only device that could connect to the RE505x when it is 802.11ax only?
Thanks a lot and wait for your reply.
- Copy Link
- Report Inappropriate Content
Thanks for answering on that.
We would like to forward your case to the senior engineers and please have a check of your email box later.
Checked and replied.
By the way, what is the model number of this device?
Is it the only device that could connect to the RE505x when it is 802.11ax only?
I connected with 2 devices only to make the situation description as simple as possible. But no, that is not only device.
I have several others AC devices and all of them can connect to the access point while it is in 802.11ax only mode. Nintendo Switch, iPad and several more.
About the mentioned device with mac address 3c:22:fb:09:f6:cc
This is MacBook Pro (13-inch, 2019, Two Thunderbolt 3 ports) .
With Wi-Fi supported PHY Modes: 802.11 a/b/g/n/ac
Here are tech specs from the vendor's site - https://support.apple.com/kb/SP799?viewlocale=en_US&locale=en_US
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 951
Replies: 3
Voters 0
No one has voted for it yet.