Home Network Community > All Threads > TP-Link Nano AC600 USB Wifi Adapter(Archer T2U Nano) keeps disconnecting from Wifi 2.4 GHZ & 5.0 GHZ
< All Threads

TP-Link Nano AC600 USB Wifi Adapter(Archer T2U Nano) keeps disconnecting from Wifi 2.4 GHZ & 5.0 GHZ

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link Nano AC600 USB Wifi Adapter(Archer T2U Nano) keeps disconnecting from Wifi 2.4 GHZ & 5.0 GHZ

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link Nano AC600 USB Wifi Adapter(Archer T2U Nano) keeps disconnecting from Wifi 2.4 GHZ & 5.0 GHZ
TP-Link Nano AC600 USB Wifi Adapter(Archer T2U Nano) keeps disconnecting from Wifi 2.4 GHZ & 5.0 GHZ
2020-12-30 16:38:16
Model: Archer T2U Nano  
Hardware Version: V1
Firmware Version:

I Bought TP-Link Nano AC600 USB Wifi Adapter(Archer T2U Nano), at first things were ok, then suddenly it is disconnecting from WiFi, i tried both 2.4GH & 5 GHz it keeps disconnecting 

 

I called my Internet provider they changed the channel, but still keeps disconnecting

I've tried installing the latest driver from your website TP-Link Driver  still the same issue.

 

I'm using Windows 10 [Version 10.0.19042.685] 

I'm using laptop Dell Inspiron 15,  5000 series

 

Appreciate your support

  0      
 
  0      
 
#1
Options
1 Reply
Re:TP-Link Nano AC600 USB Wifi Adapter(Archer T2U Nano) keeps disconnecting from Wifi 2.4 GHZ & 5.0 GHZ
2021-01-22 09:09:32

@KB_SPEC 

 

Here is the latest public driver you can give it a go:

https://static.tp-link.com/2020/202006/20200601/00015960-RTLWlanU_WindowsDriver_1030.38.0712.2019_Drv_3.00.0032.L.zip

 

Please remove all the drivers for this adapter on the computer, install the above driver manually: https://www.tp-link.com/support/faq/920/.

 

Just to confirm, what is the model number of your wireless router? You may run a Wi-Fi analyzer on the PC to verify which channel is busy and which is clear for the 5G and 2.4G network, then choose a clear channel on the router, change the 2.4G channel width to 20MHz, and 5G to 40MHz, then reboot both the router and the PC to confirm.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 2178

Replies: 1

Related Articles
TP-Link Archer T2U Nano AC600 Not showing 5G band
8991 0
Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
356 0
TP-Link Mini - AC600 USB 2.0 Wifi Adapter (Archer T2U Nano) Pop OS
60 0
Will Archer T2U Nano AC600 Nano Wireless USB Adapter support my 5ghz wifi network?
619 1
TP-Link Archer T2U Nano AC600 adapter - No light and not detected
6485 0
TP-Link Nano AC600 USB - Archer T2U Nano - Suddenly stopped connecting to 2.4 GHTz wi-fi.
461 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.