Home Network Community > All Threads > Cannot ungrade firmware to be able to select band
< All Threads

Cannot ungrade firmware to be able to select band

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot ungrade firmware to be able to select band

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot ungrade firmware to be able to select band
Cannot ungrade firmware to be able to select band
2021-01-22 08:06:31 - last edited 2021-01-25 02:25:01
Model: TL-MR6400  
Hardware Version: V5
Firmware Version: 1.1.0.0.9.1

Hi

 

From another thread I saw that i could download a beta version of firmware which would allow me to select a band, I have downloaded the firmware  (boot_up 200325) however I get an error when trying to upgrade. error 71211.

 

Basically I am using the Rain network and need to select Band 41 to be able to get decent speeds otherwise my speeds are less than 1mb.

  0      
 
  0      
 
#1
Options
6 Reply
Re:Cannot ungrade firmware to be able to select band
2021-01-22 12:25:11 - last edited 2021-01-25 02:25:01
If the FW in question is for another region then you can't use it on your device. For ex. if your device is an EU version, you can't upload a FW for US version and vise versa. You can check your device region on the bottom sticker.
If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Cannot ungrade firmware to be able to select band
2021-01-22 12:56:16 - last edited 2021-01-25 02:25:01

@Ivaylo Thanks, just checked it is an EU device, is the firmware update a US one and is there an EU update perhaps? 

  0  
  0  
#3
Options
Re:Cannot ungrade firmware to be able to select band
2021-01-22 17:16:26 - last edited 2021-01-25 02:25:01

@ImsJ

 

Here's the list of FWs for EU version with HW v5.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Cannot ungrade firmware to be able to select band
2021-01-25 02:28:28

@ImsJ 

 

Hello, are you trying to upgrade to this beta firmware?

https://static.tp-link.com/2020/202012/20201208/TL-MR6400(EU)v5_1.1.0_0.9.1_[201113-rel63736]_up_boot_all_2020-12-08_09.38.45.zip

 

As per the error message you experienced (error code 71211), it seems that you select a wrong file, please check again if you download the correct beta firmware for your MR6400, you need to unzip the file first after downloaded.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Cannot ungrade firmware to be able to select band
2021-01-25 07:42:46

@Kevin_Z 

 

hi, I did manage to download it and install it thanks, hasn't made much of a difference unfortunately, seems that the rain network is just bad in my area.

  0  
  0  
#6
Options
Re:Cannot ungrade firmware to be able to select band
2021-01-25 08:40:45

@ImsJ 

Sorry to hear that. sad

 

Are you able to test different SIM cards with it? If the Rain network is not good, maybe you can change the SIM card carrier to have a try.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 737

Replies: 6

Related Articles
Band Select
1241 0
Firmware to select band on MR-6400 V5
9629 5
I cant upload beta firmware for manual select band
1423 0
band select for mr6400 v4
11444 10
MR6400 - Unable to select band 41
2686 0
When will release Firmware for able select WI-FI channel?
732 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.