Archer AX50/AX3000 keeps disabling WiFi after reboot or turn off
Hi all
Some days ago I bought a Archer AX50, however it keeps disabling the Wi-Fi sometimes when I make a reboot or when is turn off and to "wake" the Wi-Fi I either need to connect via the web console and activating the 'Enable Wireless Radio' flag.
I thought that this was because I have active the Wireless Schedule, but this configuration makes only that in the night the Wi-Fi turn off however when I rebooted at the day also keeps disabling.
My settings are:
In Wi-Fi basic settings:
2.4 Ghz Wireless: Enable Wireless Radio (this flag is not active sometimes after reboot or an turn off)
SSID1 : (not telling you :) )
Security: WPA & WPA2-Personal
Version: WPA2 PSK
Encryption: AES
Mode: 802.11 b/g/n/ax mixed
Channel: Auto
Channel width: Auto
Enable SSID Broadcast: enabled
Airtime Fairness Feature: enable
5 Ghz Wireless: Enable Wireless Radio (this flag is not active sometimes after reboot or an turn off)
SSID1 :
Security: WPA & WPA2-Personal
Version: WPA2 PSK
Encryption: AES
Mode: 802.11 b/g/n/ax mixed
Channel: Auto
Channel width: Auto
Enable SSID broadcast: Enabled
Airtime Fairness Feature: Enable
Multi-user MIMO: Enable
Wireless Schedule: Set to Enable
Wireless off time: 1:00 - 6:00 (in this time i'm not using my wifi) Repeat: Mon, Tue, Wed, Thu, Fri
Wireless off time: 2:00 - 8:00 (in this time i'm not using my wifi) Repeat: Sun, Sat
Can you help me please?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If that is the case, I think the issue you are encountering is different from the OP. Can you please confirm the issue again with more details? Do you power off the router often, and the wireless network will no longer broadcast once you power it on again?
Have you tried to reset the router to factory defaults, either by pressing and holding the RESET button, or by hitting the Factory Reset on the router web interface page? Give it a go, and let us know the results.
- Copy Link
- Report Inappropriate Content
As I noted, the AX50 in in AP mode. I prefer to close my Wifi at night.
If I close the power outlet connected to the AX50, then after I open the power again, there is no Wifi. I have to enable the wireless radio through the web interface.
So, because of that, I decided to use the Wireless Schedule feature as in the screenshot.
However, It usually works but sometimes it does not. It happened again today.
Both green Wifi LEDs do close at the correct time but they do not open at the scheduled time.
They remain off and I have to use the web interface again to start the Wifi.
I have done a factory reset and the problems remain.
Firmware is 1.0.9 and I bought it through Amazon a couple of weeks ago.
- Copy Link
- Report Inappropriate Content
Reset the router to factory defaults by referring to this article, DON'T configure the Wireless Schedule feature on the AX50, monitor again if you can connect to the wireless network again once the router is off then on:
https://www.tp-link.com/support/faq/497/
If the wireless network is no longer available once the router is rebooted, that sounds more like a firmware issue, you may need to contact the local tech support to check if the router is faulty:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support
If the issue disappears when you manually power off then on the router, but appears only when you enable the Wireless Schedule on the router, you may wait for the future firmware update for the router, and don't use this feature at the moment.
- Copy Link
- Report Inappropriate Content
Same issue with Archer C7 AC1750.
Turn it off at night, every 10th or so power on wirless is disabled, lights are off, however UI shows everything's OK.
the only option at that point is to re-flash.
HW: C7 v.1
FW: 150511
What is the best best cours of action to stop it from loosing wifi on boot up please???
- Copy Link
- Report Inappropriate Content
So, I disabled Wireless Schedule and it is working OK for 2 days now.
I'll leave it that way and if something comes up I'll post here again.
- Copy Link
- Report Inappropriate Content
Thanks for getting back with the good news. Please leave the Wireless Schedule off at the moment, monitor if there is still an issue.
- Copy Link
- Report Inappropriate Content
Have you also tried to reset the router to factory defaults, then reconfigure it from scratch as suggested to Despotas? It's hard to say why the issue happens on your device, the firmware seems quite old now.
- Copy Link
- Report Inappropriate Content
@Kevin_Z es I have. this is how I go to the current solution - reflash FW and its back. No reboots, no factory resets, no changing of the settings could help... ://
- Copy Link
- Report Inappropriate Content
Every time I have to turn on my archer c9 router, the same thing that I mentioned several months ago keeps happening to me.
It cannot be that if a router is configured with Wi-Fi enabled, no matter how many tests they have made me do, no matter how much I put another firmware (the old one), it still does not lift. You have to go online and change a configuration as I put several months ago.
I do not know who to complain to, I am not sure if those who help here are employees and only collaborators.
The worst thing is that my router model does not accept third-party firmware, I'm sure that would fix it.
Unfortunately the next purchases will always be from another brand.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5928
Replies: 30
Voters 0
No one has voted for it yet.