HELP NEEDED TO GET PRINTER WORKING WHEN CONNECTED TO RANGE EXTENDER

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HELP NEEDED TO GET PRINTER WORKING WHEN CONNECTED TO RANGE EXTENDER

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HELP NEEDED TO GET PRINTER WORKING WHEN CONNECTED TO RANGE EXTENDER
HELP NEEDED TO GET PRINTER WORKING WHEN CONNECTED TO RANGE EXTENDER
2021-01-31 22:15:58
Model: Archer C3150  
Hardware Version:
Firmware Version:

Need someone desperately to help me get my Printer working using WIFI.

Printer: Lexmark CS417DN

Router: Archer C3150

Extender: TL WPA 8630

 

The printer works fine when connected with a cable to the router. I decided to relocate the printer to a different location, about 40 feet away from the router. 

Signal Strength of wireless router is good.

Paired a WPA 8630 with the C3150 by pressing the WPS buttton on the C3150, pressing the wifi button on the 8630 and getting both 2.4 and 5 gHz leds blink and then become steady.

Plugged the 8630 into an electrical socket and connected the printer to it using a RJ45 cable.

There are five LEDs on the 8630. Four are lit steady ON. The second from the left (has a 'home' looking graphic) does not light up.

The Printer does not work when I try and print from my laptop wirelessly.

I run the printer troubleshooter on my laptop and it shows nothing wrong but when I try and print a test page, it comes up with an error.

What am I doing wrong? 

Do I need to program the 8630? If so, How?

PLEASE HELP. THANKS 

  0      
  0      
#1
Options
2 Reply
Re:HELP NEEDED TO GET PRINTER WORKING WHEN CONNECTED TO RANGE EXTENDER
2021-02-03 11:09:18

@skkgems 

Hi,

Did you also purchase one TL-WPA8630P?

 Since normally, the powerline adapters need to work in pair(one connected to the router as the sender, the other is the extender) so the 2nd home light/powerline light would lit up;

Thank you very much and wait for your reply.

  0  
  0  
#2
Options
Re:HELP NEEDED TO GET PRINTER WORKING WHEN CONNECTED TO RANGE EXTENDER
2021-02-03 16:11:57

Thank you for your reply. I did have a pair and finally got them working together. It was a network issue.

Appreciate your help.

SK

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 422

Replies: 2

Related Articles