Firmware Updates---Onemesh firmware for Archer AX6000
Updated on 2121-02-25:
Hello all,
The Onemesh firmware for the Archer AX6000 has been officially released, those who haven't updated the AX6000 firmware for Onemesh can check for the updates on your Tether app or on the router web interface, or you can download and install it manually from the TP-Link official website here:
https://www.tp-link.com/support/download/archer-ax6000/#Firmware
We've got the new firmware for the Archer AX6000, which adds the support for Onemesh. This version has not been officially released yet, you can manually update your router firmware if you would like to implement the Onemesh with some existing range extenders.
Here is the download link:
Refer to this guide to add the existing extender to the Onemesh network:
https://www.tp-link.com/support/faq/2509/
We hope you could help provide some details about the network layout, which will help us to understand your usage better:
1. What is the model number of the range extender that you want to add to the AX6000 Onemesh network? How many extenders?
2. How large of the house, how are the AX6000 and the range extenders located, are all on the same floor, or on different floors?
3. How about the Onemesh network performance? Is it as good as expected?
Do let us know if you have any other inquiries. Have a nice day.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for the info. The tech team was made aware of your issue, they will likely reach out to you via email to continue to troubleshoot your issue.
- Copy Link
- Report Inappropriate Content
Thank you for your help! I've received an answer from your colleagues at the support. The new version of the SW (1.2.1) solved my issues. The trick is also to set the DHCP leave time to > 1440 minutes (1 day), turn off DHCP on the RE605X and use a static address for the RE605X (192.168.0.254 is the default).
Now, I get a lot from the OneMesh system - the transfer rates are ca. 80-90% if connected via RE605X.
Thanks!
- Copy Link
- Report Inappropriate Content
@Kevin_Z When will an upgrade of the Archer C6 router fix the ipv6 problem that does not work on the external connection?
- Copy Link
- Report Inappropriate Content
Hi, we hope you could spend some time on the Onemesh survey, how is the Onemesh performance:
- Copy Link
- Report Inappropriate Content
Hi @LucasMelk and all,
The Onemesh firmware for the Archer AX10 is available, please check for the update on your router web GUI/Tether app, or you can download it from the TP-Link official website, then install it manually:
Archer AX10 V1: https://www.tp-link.com/support/download/archer-ax10/v1/#Firmware
Archer AX10 V1.20: https://www.tp-link.com/support/download/archer-ax10/v1.20/#Firmware
Note: The Onemesh firmware for V1.20 may not be available now, please check it later in one day or two.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Let the community know if there is an issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 15758
Replies: 55
Voters 8
