Using a VR2800 instead of Virgin Hub 3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using a VR2800 instead of Virgin Hub 3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using a VR2800 instead of Virgin Hub 3
Using a VR2800 instead of Virgin Hub 3
2021-02-13 13:39:09 - last edited 2021-02-15 09:50:05
Model: Archer VR2800  
Hardware Version:
Firmware Version:

I can set my hub 3 to modem mode but for whatever reason, I can't get anything to (or maybe out of) my VR2800.

Do I need to make some obvious changes to the VR2800 settings?

 

  0      
  0      
#1
Options
1 Reply
Re:Using a VR2800 instead of Virgin Hub 3
2021-02-13 19:00:00 - last edited 2021-02-15 09:50:05

@Jamelex11 

 

Check this guide - https://www.cable.co.uk/broadband/guides/own-router/

for using third party router with your Virgin Hub 3.

 

"Virgin Media

Virgin says that in order to use your own router with its broadband, you'll need to use its Hub 3 as a modem. Enter 192.168.0.1 into your browser and enter the password printed on the bottom of your Hub 3 when prompted. Then select modem mode>enable modem mode>apply changes. The process is much the same if you have an older Virgin Super Hub.

"

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1072

Replies: 1

Related Articles