I just set up a Deco m9 and when I have a look at the system logs there are hundreds and hundreds of errors per day.

I have 3 m9s. The 2 satellites are set up to backhaul over Cat5E. I have good speed and no issues with the network but am curious about all the errors.

Some of the errors I get are:

Wed Feb 17 18:37:05 2021 user.err csrMeshGw[5755]: MSGQ :: CsrMeshGetMsgFromTxQueue curTxIndex : 0, tag count : 2, length : 30

Wed Feb 17 18:37:05 2021 user.err csrMeshGw[5755]: CsrMeshMsgQRead: qId=0 errno=42, No message of desired type!!!!

Wed Feb 17 18:37:19 2021 daemon.err miniupnpd[24044]: sendto(udp_notify=12, [::1]): Network is unreachable

 Wed Feb 17 18:37:25 2021 user.err csrMeshGw[5755]: CsrMeshMuxDemuxFindModelRes : Event : 0xef01, Response Event : 0xffff

Wed Feb 17 18:37:43 2021 daemon.err client_mgmt: client(DE-26-FC-7C-E0-E0) not found in arp table disconnect_counter=0

Wed Feb 17 18:52:06 2021 user.warn IMPROXY: WARNING[mcast_recv_igmp@753]: Don't exist this Downstream VIF

Wed Feb 17 18:53:09 2021 user.notice IMPROXY: INFO[mcast_to_ex_hander@170]: Group 239.255.255.250 Group Compatibility Modeis lesser than IGMPV3

Wed Feb 17 18:53:09 2021 user.notice IMPROXY: INFO[imp_verify_multicast_addr@245]: Group address 224.0.0.251 is Local Network Control Block

Whay am I getting so many errors? Are they an Issue? What can I do about it (or should I leave it)?