Archer C5400X - WPA3 and OneMesh support planned?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C5400X - WPA3 and OneMesh support planned?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C5400X - WPA3 and OneMesh support planned?
Archer C5400X - WPA3 and OneMesh support planned?
2021-02-27 09:21:31 - last edited 2021-03-01 07:28:57
Model: AC500  
Hardware Version: V1
Firmware Version: 191223

A quick question: when (if at all) is it planned to add WPA3 and OneMesh support for the Archer C5400X?

Lovely router, but it could do with such an update, especially as some lower-end models (for example the Archer C2300) have already received such an update.

  1      
  1      
#1
Options
1 Accepted Solution
Re:Archer C5400X - WPA3 and OneMesh support planned?-Solution
2021-03-01 05:48:09 - last edited 2021-03-01 07:28:57

@Maciej 

 

There is currently no plan to add the support for WPA3 or Onemesh on the Archer C5400X, while you are suggested to keep an eye on the compatibility list on the TP-Link official website just in case there is an update in the future.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Archer C5400X - WPA3 and OneMesh support planned?-Solution
2021-03-01 05:48:09 - last edited 2021-03-01 07:28:57

@Maciej 

 

There is currently no plan to add the support for WPA3 or Onemesh on the Archer C5400X, while you are suggested to keep an eye on the compatibility list on the TP-Link official website just in case there is an update in the future.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Archer C5400X - WPA3 and OneMesh support planned?
2021-03-01 07:06:44

@Kevin_Z  Thank you for the info, much appreciated. Although I do not use the C5400X now (I have it set up at my in-laws', while I use the AX11000), I must say it is an excellent router. A pity then if it won't receive WPA3/OneMesh support.

  0  
  0  
#3
Options
Re:Archer C5400X - WPA3 and OneMesh support planned?
2021-06-22 18:51:14
Assuming there are still no plans on adding One Mesh support to this model, I would strongly recommend reconsidering. It would go a long way in promoting brand loyalty, especially for those of us who have spent hundreds on one of your high end routers. Thanks!
  9  
  9  
#4
Options
Re:Archer C5400X - WPA3 and OneMesh support planned?
2021-06-22 23:39:08

@ToddZ 

I agree with you fully - OneMesh support for this router should be obligatory. And it is a great pity that it is not planned at all.

  4  
  4  
#5
Options

Information

Helpful: 1

Views: 1687

Replies: 4

Related Articles