Using MR200 as ethernet only wireless access point.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using MR200 as ethernet only wireless access point.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using MR200 as ethernet only wireless access point.
Using MR200 as ethernet only wireless access point.
2021-02-28 17:58:16 - last edited 2021-03-05 17:22:02
Model: Archer MR200  
Hardware Version: V4
Firmware Version: Unknown

Hi all,

 

I have an Archer MR200 that I use in my holiday home with a 4G SIM card as a wireless router for our devices - It works great!

 

I would also like to use it in my office to create a wireless access point and wondered if this is possible ?

 

In the office I have a single ethernet socket that gives me direct net access.  Is there any way I can plug the MR200 into that (without using the 4G SIM) and then connect both wireless and Ethernet wired machines to it to get net access ?

 

Any help much appreciated :)

  0      
  0      
#1
Options
1 Accepted Solution
Re:Using MR200 as ethernet only wireless access point.-Solution
2021-03-01 12:33:36 - last edited 2021-03-05 17:22:02

@Snowy2021 

Hi, yes.

And please go to advanced>operation mode and change the default 3/4G router mode to wireless router mode.

Thank you.

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Using MR200 as ethernet only wireless access point.-Solution
2021-03-01 12:33:36 - last edited 2021-03-05 17:22:02

@Snowy2021 

Hi, yes.

And please go to advanced>operation mode and change the default 3/4G router mode to wireless router mode.

Thank you.

Recommended Solution
  0  
  0  
#2
Options
Re:Using MR200 as ethernet only wireless access point.
2021-03-05 17:24:24

Thank you so much :)

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 4539

Replies: 2

Related Articles