Hey,

I started with a standard 3x X20 deco for my home, base station in the living room, connected as AP, 1 X20 on the first floor and an X20 in the attic. The connections did not go well in the attic, X20 regularly popped out (red flashing light), after removing the power and restarting I was able to work again for a while. Reset several times, network rebuilt, still same problem. To be on the safe side, bought an X60 extra, which is linked as a Basic AP to the modem and the 3 X20 distributed in the house. Constant problems in the attic and first floor. Blinking red light and the connection is gone. Power off and on again, then temporarily reconnected. If data goes over the line, it will pop out. The X60 has already received different firmware from Chat support, but that does not solve the problem. It seems that the X20 is not functioning properly.

I feel like the furthest away APs are trying to connect to the main AP and cannot hold this connection. It will be helpful if the APs share their connections across the floor down, but it won't.

I hope someone can help me because I can't work this way.

Greetings, Rene