Deco M4R - Power Supply

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M4R - Power Supply

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M4R - Power Supply
Deco M4R - Power Supply
2021-03-29 13:35:58
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.4.3 Build 20200918

Hi,

 

I've got 2 Deco M4's and have an Ethernet cable installed into my loft, the issue is that I have not got a plug socket in there.

What is the best way to get power to the device?

As it is only 12 volts it is a fairly low voltage to be working with and was wonder if there is a PoE injector that could provide 12 volts for Deco?

 

Otherwise it would require installing plug sockets which is a much larger job.

 

Thank you,

Jake

  0      
  0      
#1
Options
1 Reply
Re:Deco M4R - Power Supply
2021-03-29 15:13:36 - last edited 2021-03-29 15:16:24

@LeadFaceJake 

 

Can't offer you a solution with exactly what you specified, but if you are willing to do some sacrifices in terms of WiFi speed and money, I have a solution for your consideration.

 

I happened to have old PoE injector Linksys WAPPOE12, which appears to be what you may need, and I checked what it has. Its power adapter DC barrel plugs perfectly in my Deco M5, assuming M4 and E4 have same barrel plug size - it should work.

 

This PoE injector does not support gigabit, only 100Mbps. Which will reduce WiFi speeds to that, obviously. Also, according to feedback from users, its splitter will not auto negotiate if device has gigabit port. Injector part works with gigabit networks just fine, I used it at my house and can confirm that.

 

Also, I can't find exact specs for DC output, strangely enough, but from the list of compatible Linksys router models it appears WAPPOE12 delivers 12V=1A.

Deco E4 is listed at 12V=1A. Deco E4 has 100Mbps port, and that is exactly what you'll need for that solution.

 

So, if you go this way you'll need Linksys WAPPOE12 and one Deco E4. Also, make sure you confirmed DC barrel plug size is compatible with E4, which it should be if E4 is same as M5 in that respect.

 

The back of the box with Linksys WAPPOE12.

 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 2331

Replies: 1

Related Articles