Wifi Connection problem with Deco M4 Devices (triple pack)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello Everyone,
I bought TP-Link Deco M4 Device (3 devices) and i'm using them with router mode. I've some of problems with them. First of all i'm so sorry for my bad english :) My problems;
1. I have Cat6 network cable at all rooms and connected to the ISP router modem. That's why my deco m4 devices connected via cable to the isp modem. Problem is that, if 3 devices connected via cable, wifi connectios has been disconnecting continuous. if i unplug the network cable from one devices it's ok (2 devices connected via cable + 1 device connected wifi) What can be problem? I'm using with router mode. I want to use all devices via network cable but for now it's not possible for me with 3 devices.
2. If i try to use them via "Access point mode" my clients can not get an ip address from deco devices. I see 169.... ip adress on the clients. Some times can get ip and lost again a few second later. My main isp modem can not use via bridge mode. Normally my connected devices should get an ip from my isp modem? Why deco devices can not as access point without problems? I can use as router mode but access point mode can not work for me.
Hi,
I added the picture for my topology. My ISP Router/Modem using 192.168.1.1 ip range and DHPC is active. By the way i dont use any network switch, all cable from Modem Ports. When connection/ping is lost, i checked devices led, i see white and stabil color. No any red/yellow
Hi Again,
I solved the problem. I connected a cable from isp modem to main m4 deco device 1.port. And I connected another cable From main m4 deco 2.port to gigabit hub. Other devices connecting to the gigabt hub and now all deco devices connecting via cable and no any problem.I dont know also access point mode can be work without problem but at the moment i want to use as router. Current topology is this;
