Home Network Community > All Threads > Deco M5 intermittent connection (LAN)
< All Threads

Deco M5 intermittent connection (LAN)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M5 intermittent connection (LAN)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M5 intermittent connection (LAN)
Deco M5 intermittent connection (LAN)
2021-04-29 21:50:31
Model: Deco M5  
Hardware Version: V3
Firmware Version: 1.5.3 Build 20210203 Rel. 68223

TP Link Experts,

 

I have 3xDeco M5 configured in Router mode in my house.

 

The problem:

 

From time to time (once a day, on average), random devices connected to the local network stop responding (can't ping each other, for example). This is annoying because I have a lot of IoT devices (lights and switches) and I'm surprised when I try to turn them on/off and they don't respond. Sometimes my phone comes with the "incorrect password" alert and the only way to get the network up again is rebooting the Decos.

 

More details about my setup:

 

0- Hardware version: V3;

1- Firmware: lastest available (1.5.3 Build 20210203 Rel. 68223);

2- Operation mode: Router;

3- Fast Roaming: Enabled;

4- Beam Forwarding: Enabled;

5- 2.4 GHz and 5 GHz WiFi have the same SSID and password;

6- Guest Netword: disabled;

7- The 3 Decos are connected via WiFi.

 

Any ideas on how fo fix it?

 

Thank you,

 

Kadu

  0      
 
  0      
 
#1
Options
5 Reply
Re:Deco M5 intermittent connection (LAN)
2021-04-30 03:51:28

@KaduZ 

Hi,

Would any Deco blink red when the connection dropped?

How about the dropping frequency of mobile devices?

What are those IoT devices and can I get their models?

And may I also know the model number and operating system of your smartphone?

If possible, please send me the system log on the web UI http://tplinkdeco.net when the connection dropped again before restarting the Deco;

Thank you.

 

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:Deco M5 intermittent connection (LAN)
2021-04-30 12:59:32

@TP-Link 

 

Hi team, thanks for your quick reply.

 

Would any Deco blink red when the connection dropped?

Nope, green all the time on the devices and also on the app.

 

How about the dropping frequency of mobile devices?

The same, it's random. But to clarify, all devices says they're connected to the wireless network but can't communicate.

It's really weird, but I'll share something that happened the other day: I've a smart lamp in the kitchen, connected to the Kitchen Deco (which is connected via WiFi to the main Deco in the living room). My home assistant (installed on a PC connected to main Deco via WiFi) shows the device is unavailable and can't even ping the sonoff device's IP address - but I can ping and access the smart lamp's web server from the Mac connected to the Master Bedroom Deco (which is also connected to the main Deco via WiFi). On the Home Assistant PC I see the MAC address from the lamp is not recognized, and even trying to set that info manually doesn't work. I don't need to restart the PC or turn the smart lamp off/on, if I only restart the Decos all become functional again.

That might sound like a problem on my PC, but as I said it is only an example. The other day my Mac was the chosen one - connected to the network but couldn't ping other devices within my LAN and, that time, neither access any website on the internet.

 

What are those IoT devices and can I get their models?

I have several Sonoffs in the house (mini, D1 and basic R3), some flashed with Tasmota (9.2.1 and 9.3.0) and others running the stock firmware, but as shared before, this is not happening only to these devices - it's just where I feel the most impact (I can easily switch my Mac to a 4G connection from my cell phone when this happens, but not the same applies to IoT devices)

 

And may I also know the model number and operating system of your smartphone?

Sure, I'm using an iPhone 8 with iOS 14.4.2

 

If possible, please send me the system log on the web UI http://tplinkdeco.net when the connection dropped again before restarting the Deco;

I'll certainly do, I rebooted the entire system yesterday so I'll send you as soon as I face the issue again, ok?

 

Thank you.

  0  
  0  
#3
Options
Re:Deco M5 intermittent connection (LAN)
2021-05-03 23:05:47

@TP-Link 

 

Please find attached my logfile. It took a few more days for this to happen, but let me explain what's happening right now:

 

1-) From my Home Assistant PC (IP192.168.68.116 connected to the main Deco living_room) I can't reach my light (IP192.168.68.126 connected to kitchen Deco)

2-) From my Mac (IP192.168.68.100 connected to master_room Deco) I can ping and do everything with my light

3-) from my Mac I can also talk to the Home Assistant PC

4-) And it doesn't matter what I do on the Home Assistant PC, this only gets fixed when I restart all 3 Decos

 

I'm sending another message with the "ping tests" attached.

File:
log-2021-05-03.logDownload
  1  
  1  
#4
Options
Re:Deco M5 intermittent connection (LAN)
2021-05-03 23:06:23 - last edited 2021-05-03 23:18:27

Ping tests printscreen and log the logs from the light

 

00:00:00.050 CFG: Loaded from flash at F8, Count 692
00:00:00.055 QPC: Count 1
00:00:00.062 Project tasmota Luz Nicho Cozinha Version 9.3.1(tasmota)-2_7_4_9(2021-03-09T16:12:28)
00:00:00.550 WIF: Connecting to AP1 uairilis Channel 7 BSSId E4:C3:2A:F0:16:7E in mode 11n as tasmota_1ACF3D-3901...
00:00:03.753 WIF: Connected
00:00:04.007 HTP: Web server active on tasmota_1ACF3D-3901 with IP address 192.168.68.126
00:08:52.260 MQT: Attempting connection...
00:08:52.473 MQT: Connect failed to 192.168.68.116:1883, rc -2. Retry in 10 sec
00:08:53.483 QPC: Reset
00:09:03.258 MQT: Attempting connection...
00:09:03.469 MQT: Connect failed to 192.168.68.116:1883, rc -2. Retry in 20 sec
00:09:24.298 MQT: Attempting connection...
00:09:24.512 MQT: Connect failed to 192.168.68.116:1883, rc -2. Retry in 30 sec
00:09:55.278 MQT: Attempting connection...
00:09:55.491 MQT: Connect failed to 192.168.68.116:1883, rc -2. Retry in 40 sec

 

This time I used the network optimization utility to try to recover the network, but my experience with this is that in a couple of hours I'll have other issues and I'll finally reboot the entire system.

File:
Screen Shot 2021-05-03 at 8.02.30 PM.pngDownload
  0  
  0  
#5
Options
Re:Deco M5 intermittent connection (LAN)
2021-05-07 06:05:20

 

@KaduZ 

Hi, sorry for the delay.

I would like to forward your case to the senior engineers for further assistance and please have a check of your email box;

At the same time, would turning off the Mesh Technology for these smart lights help or not?

If possible, please also disable the fast roaming and beamforming on the Deco APP;

 

Thank you very much and wait for your reply. 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1107

Replies: 5

Related Articles
Deco M5 Intermittent Internet Connection
1524 0
M5 intermittent connection
1601 0
Deco M5 Etherne connection unstable / intermittent
941 0
Intermittent connection when ipv6 are enabled - Deco M5
7652 1
Deco M5 Intermittent internet connection issues
9288 0
Intermittent connection with deco m5 and windows pc
1313 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.