Cannot connect HAIKU L bigassfan to my deco m5
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am trying to connect the haiku L fan to deco m5 v3 wifi but the deco Wi-Fi network is not listed as available. My ssid is not hidden and the deco is powered on and in range of the haiku fan.
I tried with my old router and the fan connects with no problem at all.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kostispan If the fan is American, the wifi module in the 2.4Ghz frequency only works for channels 1 to 11.
Your deco m5 may be that in the 2.4Ghz frequency it is tuned to channel 12-13 or 14, in this case it does not detect the fan.
Restart the main deco as many times as necessary, until you get a channel on the 2.4 Ghz frequency that is between channels 1 and 12. then deco m5 will detect its fan.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
My network structure is
ISP-isp router - main deco - switch - other decos.
the decos are in router mode and I try to connect the fan on one of the end decos.
- Copy Link
- Report Inappropriate Content
Hi,
Have you tried to enable the guest Wi-Fi with 2.4ghz only with a different SSID and check again on the Fan to check whether it could detect the wireless network of Deco?
Thank you very much.
- Copy Link
- Report Inappropriate Content
@Kostispan If the fan is American, the wifi module in the 2.4Ghz frequency only works for channels 1 to 11.
Your deco m5 may be that in the 2.4Ghz frequency it is tuned to channel 12-13 or 14, in this case it does not detect the fan.
Restart the main deco as many times as necessary, until you get a channel on the 2.4 Ghz frequency that is between channels 1 and 12. then deco m5 will detect its fan.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kostispan Restart the main deco as many times as necessary, until you get a channel on the 2.4 Ghz frequency that is between channels 1 and 11. then deco m5 will detect its fan.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, please let me know as well.
Currently, rebooting and using the network optimization would help adjust the wireless channel of Deco;
In case the issue is still here, I would like to follow up on your case by email as well;
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kostispan I am happy for the solution with my advice, but do not forget that if you have a power cut in your house, or you touch the network optimization in the deco application, you can change the channel in 2.4Ghz and put a channel 12-13 or 14. In this case you will have to repeat the recommended option, restart the main deco.
Health.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2307
Replies: 9
Voters 0
No one has voted for it yet.