Archer AX10 (AX1500) very slow speeds on only one device regardless of adapter type
Hi there,
I'm seeing a really weird behavior with only one device connected to my AX10 (if I swap it back out with my old router, there's no problem). All of my other devices get around 150 mbps while my desktop only gets 1-5 mbps with small bursts of 30 mbps on both the 2.4GHz and 5GHz networks. This is what I've tried:
- Swapped the Wi-Fi adapter out with an N, an AC, and an AX adapter (all experienced the same problem)
- Booted into Ubuntu, Manjaro, and Windows 10 (all experienced the same problem with all Wi-Fi adapters)
- Disabled QoS in router settings
- Disabled Parental Controls in router settings
- Disabled OFDMA in router settings
- Set the channel width to the highest setting and played around with channels in router settings
- Enabled and disabled IPv6 in router settings
- Disabled Access Control in router settings
- IP assignment is set to automatic (DHCP)
- Enabled and disabled random MAC assignments in Windows 10
The separate adapters I've tried:
- Intel Wi-Fi 6 AX200 160MHz Adapter
- Intel Dual Band Wireless AC 8260 Adapter
- Edimax 150Mbps Wireless 802.11bgn Nano USB Adapter
Ping to the router from that computer is <1ms, and they're close enough to each other to run a 50ft ethernet cable between them. I'm at a loss at this point. I just don't understand what identifier the router could possibly be bugging out on or what's causing this. Thoughts?
Thanks,
Spirited