AX10/AX1500 LACP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX10/AX1500 LACP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX10/AX1500 LACP
AX10/AX1500 LACP
2021-07-31 11:26:23 - last edited 2021-08-03 05:18:13
Model: Archer AX10  
Hardware Version: V2
Firmware Version: 1.1.6 Build 20210108 Rel. 60533(4555)

Hey folks.

The AX50 supports LACP according to the documentation, while the AX10 does not.

BUT, when using the search function, it actually shows the submenu, where the LACP is supposed to be.



Clicking on the link does nothing, the HREF is "lanAdv", and there are no network errors on load.

Is it possible, to get a firmware update, enabling LACP support for the LAN, via the frontend?
Or is this just a leftover from the same frontend used for both the AX10 and AX50?

I dont really wanna bother with doing LACP from the switch side, since i will also need trunking and spanning tree, and its an old TP-Link switch.

  0      
  0      
#1
Options
1 Accepted Solution
Re:AX10/AX1500 LACP-Solution
2021-08-03 02:04:29 - last edited 2021-08-03 05:18:13

Hi @ku4eto, as terziyski pointed out that the AX10 doesn't support LACP, and the web GUI may not update accordingly to the specific firmware. We will remind the R & D to update that in the future versions.

 

Sorry that we don't know much about the hardware and firmware limitations, so we will not know if the AX10 hardware can support LACP actually, but the situation is it doesn't have LACP on the current firmware. If you do need this LACP feature, you need to find one that already supports it, such as AX50 or AX6000.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#5
Options
4 Reply
Re:AX10/AX1500 LACP
2021-07-31 17:44:35 - last edited 2021-08-03 12:34:21

@ku4eto 

 

AX10 doesn't support LACP. Probably it's just a universal WebGUI guidance for AX series devices.

It's highly unlikely this model will receive a FW upgrade with LACP feature since it's an entry level device from AX series.

You should have in mind that even on AX50 the implemented aggregation is not an LACP, but just a static link aggregation.

More details about the hardware in question.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:AX10/AX1500 LACP
2021-07-31 19:44:29

@terziyski 

Yes, i know its not officially supported.

But in terms of HW, it should. There is no reason why it shouldnt.

It looks more like a "tier feature availability".
And i see no reason also for the AX50/3000 to support LACP only on 2 specific ports, instead of any. Unless the ports are wired differently, which would not make much sense.

  0  
  0  
#3
Options
Re:AX10/AX1500 LACP
2021-08-02 13:18:38

@Kevin_Z    

Can you clarify on this, please?

  0  
  0  
#4
Options
Re:AX10/AX1500 LACP-Solution
2021-08-03 02:04:29 - last edited 2021-08-03 05:18:13

Hi @ku4eto, as terziyski pointed out that the AX10 doesn't support LACP, and the web GUI may not update accordingly to the specific firmware. We will remind the R & D to update that in the future versions.

 

Sorry that we don't know much about the hardware and firmware limitations, so we will not know if the AX10 hardware can support LACP actually, but the situation is it doesn't have LACP on the current firmware. If you do need this LACP feature, you need to find one that already supports it, such as AX50 or AX6000.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#5
Options

Information

Helpful: 0

Views: 1091

Replies: 4

Related Articles