How to Change wifi Bandwith Channel on Deco X20
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Does anyone know how to change the channel bandwidth on a Deco X20 mesh kit as I'm getting interference from neighbours wifi on the same channel as mine.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I also have those problem, how to change WiFi channel?
- Copy Link
- Report Inappropriate Content
- Log into the webpage of the x20 on your local network
- top left hand corner, click, select Advanced, then select Status
- scroll down and you will see the options to change both the 2.4 and 5ghz channels.
Enjoy :)
- Copy Link
- Report Inappropriate Content
Hi, the general firmware for Deco does not allow manually selecting the channels.
Your current firmware 2.0.3 is a customized firmware for the local service providers in New Zealand which is not suitable for other models.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Sir, when can upgrade the firmware to us. I I had facing very serious channel signal interference since bought deco X20😐
- Copy Link
- Report Inappropriate Content
Same need with X20-4G (and 2 pcs X20), 6 and 36 channels autoselected, but conflict with others.
Checked mob-app and web and not an option to force ;-/
Otherwise great product Manual selection would be appriciated!!
- Copy Link
- Report Inappropriate Content
@Eko_Deco my X90 on every scan says "Need to optimise channel" when I click Optimize and run it again - the same result.
But you know X90 is an AI router (with 7 months old firmware, costing 600 euro). Expecting TP-Link VR Deco and all marketing misleading words that they can use
- Copy Link
- Report Inappropriate Content
@TP link This problem affects all deco x20 devices. It often makes them useless. I understand the difficulties for 5ghz but why don't you release this functionality for 2ghz?
It happens that Deco selects a channel that some devices cannot use. Often the device that worked in channel X after waking up waits for communication in channel X and Deco changed the channel to Y and we have a problem
A huge number of users expect this functionality. Can't you solve such a problem?
- Copy Link
- Report Inappropriate Content
Regret to buy this product, useless...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 3790
Replies: 8
Voters 1
