AX73 "Ethernet doesn't have a valid ip configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
Just got the AX73 and have been getting very good speed on the WiFi. Not much luck with LAN on my Hp Z620 though. It show unidentified network and when troubleshoot, the ethernet doesn't have a valid ip configuration message comes up. Have read some of the queries here and tried those steps. Tried many recommendations from YouTube. Nothing work. When I switched back to my old Asus router, it worked fine. Any idea what I need to do for it to work on LAN?
Thank you.
Ed
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Is there any chance that at some point during your time with the Asus router the Hp Z620's network adapter was configured to have a static IP address?
By default Asus routers usually have the LAN in the subnet 192.168.1.x, while on the AX73 the default is 192.168.0.x.
- Copy Link
- Report Inappropriate Content
Thanks for the response. Not that I know of as I've only use the auto setting. Don't think I've use the static setting before. I'm more like a plug and play user. 😅
- Copy Link
- Report Inappropriate Content
Ok, just make sure it is presently set to auto. ("Obtain an IP address automatically")
Do you have another Ethernet cable at hand that you could try with?
Does the problem appear identically on all four LAN ports of the AX73?
- Copy Link
- Report Inappropriate Content
Yes, it's on auto. I've tried 4 cables, all 4 ports of the AX73 and both ports on the Z620. No luck so far.
- Copy Link
- Report Inappropriate Content
That doesn't sound good.
Can you pull up the "Ethernet Status" window on your desktop computer and if yes, what information does it show? Does it show a value for "Speed"? And if you click on "Details", does it show any sort of IP address information?
- Copy Link
- Report Inappropriate Content
@woozle Did some test yesterday. Port 2 & 3 is now working. 1 & 4 still the same. What I did was to unplug the network cable from the PC, plug it into the router first before plug back to the PC. If the cable is plugged into the PC first it'll not work. Still not sure why 1 & 4 is not working.
- Copy Link
- Report Inappropriate Content
Firstly, please check and update the Ethernet driver version to the latest on the HP Z620.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2005
Replies: 8
Voters 0
No one has voted for it yet.