Hello,

I have long-lasting problems with my Deco m4 setup so finally I decided to ask for help.

My main issue is unstable connection - usually it is about 30% of lost pings and that is unbearable as it still disconnects me from calls. I will point this at the begining - I always have blue light illuminating from all my Deco units. Here is example:

Reply from 13.32.99.22: bytes=32 time=18ms TTL=244

Reply from 13.32.99.22: bytes=32 time=18ms TTL=244

Reply from 13.32.99.22: bytes=32 time=19ms TTL=244

Reply from 13.32.99.22: bytes=32 time=21ms TTL=244

Reply from 13.32.99.22: bytes=32 time=20ms TTL=244

Reply from 13.32.99.22: bytes=32 time=18ms TTL=244

Reply from 13.32.99.22: bytes=32 time=26ms TTL=244

Reply from 13.32.99.22: bytes=32 time=18ms TTL=244

Request timed out.

Reply from 13.32.99.22: bytes=32 time=18ms TTL=244

Request timed out.

Reply from 13.32.99.22: bytes=32 time=19ms TTL=244

Ping statistics for 13.32.99.22:

Packets: Sent = 863, Received = 658, Lost = 205 (23% loss),

Approximate round trip times in milli-seconds:

Minimum = 16ms, Maximum = 898ms, Average = 30ms  

Moreover there are other thinks that worries me. I got many warnings in my system logs and unfortunately, as I am not a specialist, I do not really understand them. Here is another example:

user.emerg syslog: Successfully initialized wpa_supplicant
user.emerg syslog: uci: Entry not found
user.emerg syslog: net.bridge.bridge-nf-call-custom = 1
daemon.crit awn[1419]: [awnd_update_wifi_tpie:895]: config_generic failed awnd_update_tpie(): ath02[-1]
daemon.crit awn[1419]: [awnd_update_wifi_tpie:895]: config_generic failed awnd_update_tpie(): ath12[-1]
user.emerg syslog: tp217,505[1821]:
user.emerg syslog: tp217,504[1821]:

The other thing is Deco CPU Load and Memory Usage - it is almost all the time at 70-90%. I don't really know if the usage should be that high.

I tried to connect few different devices - my own PC, family laptops and smartphones - with the same results. I digged this forum and tried many solutions, but unfortunalely none works for me. 

This is my Deco Map

If you have any solutions, I would be really grateful :))