TL-WDR4900 problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WDR4900 problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WDR4900 problem
TL-WDR4900 problem
2013-04-04 00:35:20
Region : Russia

Model : TL-WDR4900

Hardware Version : V1

Firmware Version : 3.13.1 Build 121207 Rel.59681n

ISP : Netera


Hello,
Today I arrived my new router: TL-WDR4900. I configured the network, static IP, and activated only 2,4 GHz, forwarding several ports (behind the router has a server that has so far been ruled by router 200 MHz. without problems.). But TP-link work normally only 20-30 minutes, then began a huge loss of packets in the local and global network. After reboot, again operating normally, but after maximum 30 minutes, situation is repeated.

Please help to solve my problem! Thank you!
  0      
  0      
#1
Options
7 Reply
Re:TL-WDR4900 problem
2013-04-05 20:46:58
How about give a try to turn off the Hardware NAT on the router?
  0  
  0  
#2
Options
Re:TL-WDR4900 problem
2013-04-05 23:52:27
Disable NAT, not a solution, because when NAT is OFF, port forwarding not working!

This device, in fact, is unusable for me, reading this forum, I understand that and to other users, the situation is identical. Apparently there is global problem with the software .... We are waiting for decision.
  0  
  0  
#3
Options
Re:TL-WDR4900 problem
2013-04-06 14:26:55
There are two NAT on the TP-LINK menu.One is software NAT, another is Hardware NAT. Disable Hardware NAT will not effect the port forwarding function or any other NAT function
  0  
  0  
#4
Options
Re:TL-WDR4900 problem
2013-04-07 16:32:35
I Disable Hardware NAT, but now, all my peers connect very slowly (behind router have server with about 80 peers). In fact, even when Hardware NAT is enable, peers connect slower than with my old router, which had only 200 MHz CPU. My server makes a high number of TCP connections, but uses very little internet speed, about 2 megabits.

Example:
Upon reboot the server behind the old router, all peers are connected after 20-30 seconds. Now with the new drives, the same process takes 5-6 minutes.

Perhaps there is an additional setting for the high number of TCP connections, which I'm missing?
  0  
  0  
#5
Options
Re:TL-WDR4900 problem
2013-04-10 09:10:41
http://forum.tp-link.com/showthread.php?2395-Problems-of-WDR-4900&region=china I just found this post and you can try to install the Beta firmware to give a try.
  0  
  0  
#6
Options
Re:TL-WDR4900 problem
2013-04-10 15:57:06
A few days ago, I installed: wdr4900nv1_en_3_14_1_up (130304) _beta.bin, now is not interrupted, but my peers, still connect very slowly.
  0  
  0  
#7
Options
Re:TL-WDR4900 problem
2013-04-10 21:35:41
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 826

Replies: 7

Related Articles