Home Network Community > All Threads > WR702N Diagnostic Tools not working.
< All Threads

WR702N Diagnostic Tools not working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WR702N Diagnostic Tools not working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WR702N Diagnostic Tools not working.
WR702N Diagnostic Tools not working.
2013-05-03 12:49:33
Region : Argentina

Model : TL-WR740N

Hardware Version : V4

Firmware Version :

ISP :

Region : India

Model : TL-WR702N

Hardware Version : V1

Firmware Version : 4.18.114 Build 130314 Rel.39604n

ISP : BSNL

702N runs as repeater mode to W8968. In 702N > Maintenance > Diagnostic the ping work for Internal network but fail for external IPs.
Most devices connected to 702 can access Internet fine.
I have also tried Bridge and Client mode.

Ping to W8968
[CODE]
Pinging 10.0.0.1 with 64 bytes of data:

Reply from 10.0.0.1: bytes=64 time=1 TTL=64 seq=1
.............
[/CODE]

Ping to Internet
[CODE]
Pinging 8.8.8.8 with 64 bytes of data:

Request timed out.
.............
[/CODE]
  0      
 
  0      
 
#1
Options
7 Reply
Re:WR702N Diagnostic Tools not working.
2013-05-06 17:11:06
As you can ping 10.0.0.1 on the repeater, the suggests the connection between the W8968 and WR702N is OK.
When connect your device to the repeater by cable, are you able to automatically obtain an appropriate IP address assigned by the W8968 through the repeater on this device?
  0  
  0  
#2
Options
Re:WR702N Diagnostic Tools not working.
2013-05-06 17:58:40
yes, and the device connected to the repeater can access Internet. But the diagnostic tools doesn't work.
  0  
  0  
#3
Options
Re:WR702N Diagnostic Tools not working.
2013-05-08 20:54:16
As I mentioned in another thread, I have the same problem in both client mode and repeater mode. However for me, the connected devices cannot access the internet either. I'm glad it's not just me that has this problem, it's clearly a configuration or firmware issue.
  0  
  0  
#4
Options
Re:WR702N Diagnostic Tools not working.
2013-05-13 15:09:22
Have you tried other external IPs instead of 8.8.8.8 via the TL-WR702N's diagnostic tool? How about the result?
As you mentioned devices connected to the WR702N can access internet, i suspect you can ping 8.8.8.8 on your device, right?
  0  
  0  
#5
Options
Re:WR702N Diagnostic Tools not working.
2013-05-13 19:33:52
Pinging / tracert to others IPs / domains from diagnostic tools doesn't work.

I can do that fine from attached device.
  0  
  0  
#6
Options
Re:WR702N Diagnostic Tools not working.
2013-05-15 15:28:14
Here is my suggestion:
on the WR702N's page, go to DHCP and enter TD-W8968's LAN IP address into "default gateway" on the "DHCP settings" page. Then save and reboot the WR702N.
Then check if you are able to ping external IPs.
  0  
  0  
#7
Options
Re:WR702N Diagnostic Tools not working.
2013-05-15 18:11:07
No, It didn't work.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 765

Replies: 7

Related Articles
Disappointed by P9 diagnostic tools
1098 1
Archer C7 Diagnostic Tools does not ping fixed IP on the network
1135 0
Hardware Version:Archer C5 v4 00000004, in Diagnostic Tools not the ping test page
1537 0
WR702N v1.0 not working with ChromeCast
505 0
Router stop working intermittently with exception in diagnostic
478 0
admin tools
641 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.