Home Network Community > All Threads > Force connection to Main Deco over PLC?
< All Threads

Force connection to Main Deco over PLC?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Force connection to Main Deco over PLC?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Force connection to Main Deco over PLC?
Force connection to Main Deco over PLC?
2021-10-15 11:13:18
Model: Deco P9  
Hardware Version: V1
Firmware Version: 1.1.3 20201228 Rel 55057

I would like to force both of my two satellite deco P9's to connect to the main unit over PLC. This is because I am experiencing stability issues with connecting to a satellite unit. Typically it goes as follows:

 

Main unit - devices are fine, no drop outs. 

First satellite unit (connected to main unit) - same, all fine, no drop outs

Second satellite unit (connected to satellite unit) - bad, drops out occasionally (every few minutes) with flashing red light on unit.

 

I hadn't realized this until I had started to use the second unit in earnest, and those dropouts kill any use of VOIP, for example. 

 

Am hoping there is a solution

 

Kind Regards

 

Nick

 

 

 

 

  0      
 
  0      
 
#1
Options
5 Reply
Re:Force connection to Main Deco over PLC?
2021-10-16 00:33:44 - last edited 2021-10-16 00:34:00

@NickBB 

 

Have you tried the following test: power off First satellite unit and see if Second satellite unit can actually connect to Main unit using powerline?

 

You may find that Second satellite unit does not see Main unit through powerline and uses WiFi for backhaul instead, or just can't connect to Main at all.

If Second unit can connect to Main through powerline, run it that way for some time, with First satellite still off, to test stability of connection.

 

 

  0  
  0  
#2
Options
Re:Force connection to Main Deco over PLC?
2021-10-18 06:24:46

@NickBB 

Hi, if possible, please also try to install the following firmware to see whether it helped or not.

https://static.tp-link.com/beta/2021/202106/20210628/Deco_P9_V1_V2_1.1.3_20210616_Backhaul.zip

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#3
Options
Re:Force connection to Main Deco over PLC?
2021-10-22 09:23:56

@TP-Link 

 

Thanks for this. I've installed a few days ago and everything seems far more stable. Why is this not available when searching for firmware updates directly? 

 

All the best, 

 

Nick

  0  
  0  
#4
Options
Re:Force connection to Main Deco over PLC?
2021-10-27 12:53:38

@TP-Link When will the new firmware officailly be available?
I also have stabillity issues which I would not expect when the powerline backhaul would be working fine - I'll try the beta firmware for now.

  0  
  0  
#5
Options
Re:Force connection to Main Deco over PLC?
2021-10-28 06:53:14

@Peter.vD 

Hi, as for the ETA of the firmware, I am afraid there is no further information available.

But I would highly appreciate it if you could let me know whether the beta firmware is working or not.

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1405

Replies: 5

Related Articles
Deco P9 PLC issue
2345 0
Stop advertising SSID when no connection to main Deco
746 0
PX50 Deco's - Force PLC Connection
349 0
Deco P9 PLC security issue
83 1
Deco P9 PLC on/off and losing internet connection
860 2
Deco P9 Keep Disconnect (PLC problem)
4667 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.