Vi sim card is not working in the TPLINK MR200 Router.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Vi sim card is not working in the TPLINK MR200 Router.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Vi sim card is not working in the TPLINK MR200 Router.
Vi sim card is not working in the TPLINK MR200 Router.
2022-01-24 13:57:12 - last edited 2022-04-20 03:04:26
Model: Archer MR200  
Hardware Version: V5
Firmware Version:

Vi postpaid sim card is not working in the Archer MR200 router also couldnt connect to TP-Link cloud. Receiving error is "Not connected to internet" after connecting WIFI on the phone there also receiving same issue "Cannot access to internet connection". I tried other sim card they working perfectly.

Kindly, Help me with this concern.

  7      
  7      
#1
Options
1 Accepted Solution
Re:Vi sim card is not working in the TPLINK MR200 Router.-Solution
2022-04-19 13:49:12 - last edited 2022-04-20 03:04:26

  @Jram 

 

These settings are for VI sim users.

 

Create a new profile on the Advance>Internet page and Keep the below settings.

Network Search: Auto
Profile Name: Vi
PDP Type: IPv4
APN Type: Static
APN: internet
Authentication Type: None

Recommended Solution
  8  
  8  
#7
Options
8 Reply
Re:Vi sim card is not working in the TPLINK MR200 Router.
2022-01-26 12:32:33 - last edited 2022-01-26 12:34:02

@Camo 

Hi, Thank you very much for your feedback.

I see this is a similar post @Deepakmor TL MR-100 Not working with VI postpaid sim about VI postpaid SIM and It occurred to me that I was told by one user who used Singtel prepaid SIM that some special SIM plan service is only for Phone only, which could not be shared with other users

(https://www.singtel.com/personal/products-services/mobile/prepaid-plans/hi-sim-cards#hisimcard).

So I wonder maybe you guys have the same case.

In this way, could you please help me run a simple test:

1. put the VI postpaid SIM into a smartphone and enable the hotspot.

2. then connect other devices to the hotspot and whether you could get internet service.

Thank you.

  0  
  0  
#2
Options
Re:Vi sim card is not working in the TPLINK MR200 Router.
2022-01-26 12:36:36

@TP-Link Thanks for your feedback.

My issue is resolved. I made some changes in the Dial-up settings now it's working perfectly.

 

Thanks.

 

  3  
  3  
#3
Options
Re:Vi sim card is not working in the TPLINK MR200 Router.
2022-04-06 17:44:01

  @Camo 

 

I have same problem on my divice plz help .

VI sim not working on my tp link Archer Mr 200

 

  0  
  0  
#4
Options
Re:Vi sim card is not working in the TPLINK MR200 Router.
2022-04-18 06:41:28

  @Jram 

 

Hi,

 

May I have the screenshot of Advanced->Status page and also Advanced->Network->Internet page?

If the current APN profile uses PDP Type IPv4&IPv6, please create a new profile manually and change it to IPv4 only to see if it helps.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options
Re:Vi sim card is not working in the TPLINK MR200 Router.
2022-04-18 06:56:43

  @Camo hello camo, may i know which settings you have changed

 

  0  
  0  
#6
Options
Re:Vi sim card is not working in the TPLINK MR200 Router.-Solution
2022-04-19 13:49:12 - last edited 2022-04-20 03:04:26

  @Jram 

 

These settings are for VI sim users.

 

Create a new profile on the Advance>Internet page and Keep the below settings.

Network Search: Auto
Profile Name: Vi
PDP Type: IPv4
APN Type: Static
APN: internet
Authentication Type: None

Recommended Solution
  8  
  8  
#7
Options
Re:Vi sim card is not working in the TPLINK MR200 Router.
2022-04-19 13:50:00

  @Namann1 

 

These settings are for VI sim users.

 

Create a new profile on the Advance>Internet page and Keep the below settings.

Network Search: Auto
Profile Name: Vi
PDP Type: IPv4
APN Type: Static
APN: internet
Authentication Type: None

  0  
  0  
#8
Options
Re:Vi sim card is not working in the TPLINK MR200 Router.
2022-05-14 17:14:20

  @Camo thanks for suggestion appritiate it.

  0  
  0  
#9
Options