Archer AX10 - OneMesh support is Missing!!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX10 - OneMesh support is Missing!!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX10 - OneMesh support is Missing!!!
Archer AX10 - OneMesh support is Missing!!!
2022-02-08 07:21:58 - last edited 2022-06-09 02:51:27
Model: Archer AX10  
Hardware Version: V1
Firmware Version: 1.2.5 Build 20220117 Rel. 52085(5553)

I am currently using Archer AX10 Wi-Fi router. Details are given below,

  • Hardware Version:  Archer AX10 v1.20
  • Firmware Version: 1.2.5 Build 20220117 Rel. 52085(5553)

 

The OneMesh supporting device link is : TP-Link OneMesh Devices 

 

Archer AX10 is listed in the above mentioned supporting device list .The product description page (Archer AX10 | AX1500 Wi-Fi 6 Router | TP-Link India) also mentions that the router will support OneMesh. But there is no option available for connecting OneMesh in the router administration page . Emulator link is Opening... (tp-link.com) . I contacted the Technical Support team.  They informed me that the Archer AX10 WiFi router will not support OneMesh. I don't think the information passed to me by the support team is correct as the product description says that this feature is available . Please advise how can I configure the settings in the router .

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer AX10 - OneMesh support is Missing!!!-Solution
2022-02-08 20:16:09 - last edited 2022-02-09 15:02:13

@Dijin 

 

Exactly what I've meant:

See point 4. from your FW final release screenshot - "Imrpoved the stability of OneMesh feature".

You can also refer to this official announce here.

Note that If your AX10 is in AP mode - you can't configure the OneMesh feature - see OneMesh FAQ - Q8/A8.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#4
Options
4 Reply
Re:Archer AX10 - OneMesh support is Missing!!!
2022-02-08 13:55:05 - last edited 2022-02-08 14:25:15

@Dijin 

 

Emulator FW version release date is before the OneMesh feature has been implemented:

 

 

 

 

Here's a video guide on how to set up a OneMesh with a RE.

You may also look at this guide for more details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer AX10 - OneMesh support is Missing!!!
2022-02-08 15:38:25 - last edited 2022-02-08 16:49:39

@terziyski Thank you for your reply. I have mentioned the link just for reference. The emulator link is provided on the Archer AX10 product page. It is old firmware vesion. Link - Download for Archer AX10 | TP-Link India . Actual Firmware and Hardware version are mentioned in the post above. The screenshot of the actual wifi router administration page is given below. But there is no option to enable the OneMesh.

 

 

Current firmware version is latest one. Please check the below sreenshot, Download for Archer AX10 | TP-Link India

 

  0  
  0  
#3
Options
Re:Archer AX10 - OneMesh support is Missing!!!-Solution
2022-02-08 20:16:09 - last edited 2022-02-09 15:02:13

@Dijin 

 

Exactly what I've meant:

See point 4. from your FW final release screenshot - "Imrpoved the stability of OneMesh feature".

You can also refer to this official announce here.

Note that If your AX10 is in AP mode - you can't configure the OneMesh feature - see OneMesh FAQ - Q8/A8.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#4
Options
Re:Archer AX10 - OneMesh support is Missing!!!
2022-02-09 07:41:24 - last edited 2022-02-09 15:06:56

@terziyski  Thank you for your reply. :). It is working fine. The issue was due to the wifi router I had used by Access Point Mode. As per your instruction, I had modified the settings and the OneMesh option was then available. Appreciate your timely response .

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1892

Replies: 4

Related Articles