Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Issue after installing a Router

< All Threads

Issue after installing a Router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Issue after installing a Router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

spagettilegs

2022-02-24 17:14:43 - last edited 2022-02-24 17:48:03

Posts: 5

Helpful: 7

Solutions: 0

Stories: 0

Registered: 2020-04-16

Issue after installing a Router

2022-02-24 17:14:43 - last edited 2022-02-24 17:48:03

If I change my new routers default IPv4 address on my new router to the IPv4 address on my last router, will my network completely fall apart or is it straight forward? I only want to change it because I have an IP address thats outside my new routers range and it's not being picked up by tyhe new router.

My routers address IPv4 192.168.178.1 and the DHCP server assigns IPv4 addresses between 192.168.178.20 to 192.168.178.200. The IP address I need to reach is 192.168.1.101.

Many thanks

1 Reply

Wayne-TP

2022-02-25 10:11:33 - last edited 2022-02-25 10:19:45

Posts: 3574

Helpful: 661

Solutions: 988

Stories: 12

Registered: 2020-06-23

Re:Issue after installing a Router

2022-02-25 10:11:33 - last edited 2022-02-25 10:19:45

Hi @spagettilegs

Thanks for reaching out to us.

May I know what is the model of your old router and new router?

How does your new router connect to old router? In another word, what is your network topology?

And how does this 192.168.1.101 device connect to your new router? Did you set static IP on this device?

Here are two methods based on my current presumption to help you access to 192.168.1.101 device:

Method one: On 192.168.1.101 device, please change settings from static IP to dynamic IP, so that this device will get IP from the new router, then you can reach to this device.

Method two: In your network, if there is only new router, you can try to change the LAN IP address of your new router to 192.168.1.1, then your new router is in the same subnet with the 192.168.1.101 device.

How to change the LAN IP on a TP-Link router (new Logo)?

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.

spagettilegs

2022-02-24 17:14:43 - last edited 2022-02-24 17:48:03

Posts: 5

Helpful: 7

Solutions: 0

Stories: 0

Registered: 2020-04-16

Information

Helpful: 0

Replies: 1

Issue after installing a Router

Issue after installing a Router

Information

Voters 0

Tags