Configuration AX53 with IPTV
Hello,
I have some doubts about the configuration of the Archer AX53 Router.
I have movistar company with IPTV and I have configured the company router in bridge mode.
I have configured the tp-link router with Internet Connection Type: PPPoE, getting the internet working.
I have also enabled the IPTV / VLAN in Bridge mode, getting the movistar IPTV working, selecting port 3 as IPTV, but there are some applications within the movistar decoder, which work with internet, and selecting port 3 as IPTV does not give me internet connection on that port and therefore I do not work those applications or services such as netflix or disney plus.
How can I solve this?
On the other hand, I have also tried connecting a Movistar ONT directly to the TP-Link router.
I have configured it by enabling the IPTV / VLAN in custom mode, assigning the following parameters
Internet VLAN ID: 6
Internet VLAN Priority: 1
IPTV VLAN ID: 2
IPTV VLAN Priority: 4
I have managed to get the internet working, but I have not managed to get movistar IPTV working, as I have not been able to enter the IP of the movistar decoder 10.149.162.XXX, nor the subnet mask 255.128.0.0, nor the gateway 10.128.0.1 nor the DNS 172.26.23.3.
Where should I enter this data for movistar IPTV to work?
I have also tried to enter this data directly into the Movistar decoder, changing it from DHCP mode to static mode and entering IP, subnet mask, gateway and DNS and I still can't get IPTV to work on the TP-Link router.
Have I left something to configure, some routing or similar?
Thanks and best regards.