Deco x20 to EAP225-Outdoor
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco x20 to EAP225-Outdoor
My home network is set up in the following way;
- ADSL to a Router
- Router to DECO x20
- DECO x20 to a TP-Link switch
- DECO x20 to 2 DECO x20 wifi mesh in main house
- DECO x20 to 1 DECO x20 in Guesthouse wifi mesh Guesthouse is 50 feet away
- TP-Link Switch to 2 EAP225 Outdoor Access Point mounted outdoors.
All the devices have the same SSID, and password.
My question. Will the EAP225's continue the mesh network from the indoor DECO x20's? Will the users be able to roam with out acquiring a new IP address?
Re:Deco x20 to EAP225-Outdoor
Hi, the users will switch to different access points without acquiring a new IP address but the wireless network of Deco and EAP still belong to different Wi-Fi networks.
They could not use it to create the same Mesh network:
TP-Link Omada Mesh VS Deco Mesh VS OneMesh™: What's the Difference?
Deco Monthly Recap- Check What's Currently Going on With Deco
Deco X50/X55_V1_1.6.0 Open for Test!
Try to leave a Message if urgent help is required.