Deco X90 Wireless Router mode only has 100Mbps WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco X90 Wireless Router mode only has 100Mbps WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco X90 Wireless Router mode only has 100Mbps WAN
Deco X90 Wireless Router mode only has 100Mbps WAN
2022-03-28 14:21:26 - last edited 2022-04-08 17:48:20
Model: Deco X90  
Hardware Version:
Firmware Version: 1.1.2 Build 20210722 Rel. 65801

My internet speed: 300Mbps download; 50Mbps upload.


When connecting Deco X90 as Wireless Router Mode, I only obtained 100Mbps, regardless of whether I'm connecting Ethernet port 1Gbps or 2.5Gbps or WIFI6, WIFI5, etc, I could only get 100Mbps internet download speed, and 50Mbps upload.

 

 

When connecting Deco X90 as AP mode, through the free cheap wifi router that came with the subscription, I was able to obtained 300Mbps.

All devices are able to obtained near 300Mbps connecting to Deco X90. Deco X90 was connected to the cheap wifi router via 1Gbps ethernet.

 

I am in disbelief that such expensive device Deco X90 are not able to reasonably act as a Wireless Router. And the specification did not mention, in any way, and the router mode was limited to 100Mbps for Deco X90? Unless I did something wrong? 

 

 

 

 

 

 

  2      
  2      
#1
Options
1 Accepted Solution
Re:Deco X90 Wireless Router mode only has 100Mbps WAN-Solution
2022-03-29 05:54:30 - last edited 2022-04-08 17:48:20

  @voidptr0 

Thank you very much for your feedback.

I can assure you that Deco X90 is capable of 1G and even more with its 2.5G port.

As for why it is capped as 100m/s on wireless router mode, here are some suggestions for your reference:

1. Please check the Qos settings under HomeShield and make sure it is disabled.

2. Please change a new cable to connect Deco X90 to the ISP modem.

If still nothing changed, May I know who is your internet service provider and how about the model number of the ISP modem?

 

 

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Deco X90 Wireless Router mode only has 100Mbps WAN-Solution
2022-03-29 05:54:30 - last edited 2022-04-08 17:48:20

  @voidptr0 

Thank you very much for your feedback.

I can assure you that Deco X90 is capable of 1G and even more with its 2.5G port.

As for why it is capped as 100m/s on wireless router mode, here are some suggestions for your reference:

1. Please check the Qos settings under HomeShield and make sure it is disabled.

2. Please change a new cable to connect Deco X90 to the ISP modem.

If still nothing changed, May I know who is your internet service provider and how about the model number of the ISP modem?

 

 

Recommended Solution
  0  
  0  
#2
Options
Re:Deco X90 Wireless Router mode only has 100Mbps WAN
2022-04-08 17:54:25

  @David-TP  Thanks. Disabling the QoS nailed it. Now I can achieve 300Mbps speed.


 

  2  
  2  
#3
Options