Home Network Community > All Threads > MR600 Carrier Aggregation Issue - United Kingdom
< All Threads

MR600 Carrier Aggregation Issue - United Kingdom

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR600 Carrier Aggregation Issue - United Kingdom

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR600 Carrier Aggregation Issue - United Kingdom
MR600 Carrier Aggregation Issue - United Kingdom
2022-04-07 16:01:37
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n

Hello,

 

I've recently purchased an MR600 to upgrade my existing MR200 - I've not been able to enable Carrier Aggregation and therefore 4G+ on the router. I'm on the Three network and 4G+ works when CA on a mobile device, but even when two compatible bands are selected as per the TP-Link website (B3+B20), the router only uses B3 and operates only on 4G LTE, even with 100% signal strength.

 

Firmware is up to date, signal strength is at 100%.

 

I've not seen any solutions from other threads.

 

Thanks for your help in advance!

Dan

  0      
 
  0      
 
#1
Options
2 Reply
Re:MR600 Carrier Aggregation Issue - United Kingdom
2022-04-09 12:12:16

  @Danaphoria 

 Can you try a combination of 3 bands (such as B3+B20+B32 or any other combination)?

the reason for this suggestion is that from experience/observation, the MR600 works best with 3 or more LTE bands if set to "4G Only" mode

  0  
  0  
#2
Options
Re:MR600 Carrier Aggregation Issue - United Kingdom
2022-04-18 02:51:24

  @Danaphoria 

Hi, thank you very much for the feedback.

1. What is the network type and bands when using Auto bands?

2. Please confirm which 2CA band combinations supported by Three network, then try other band conbinations when selecting 4G band manually

3. You mentioned that 4G+ works on a mobile device, are they using the same SIM card? and what is the band working on the mobile device?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 929

Replies: 2

Related Articles
MR600 carrier aggregation not working
1668 0
MR600 Carrier Aggregation Issue
8576 2
MR600 V2 Carrier Aggregation Issue
1519 0
Question about Carrier Aggregation
805 0
MR600 carrier aggregation not working
1433 0
Archer MR600 V2 Carrier Aggregation & Band Selection
25587 15
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.