Deco M5 - Expanding IP Address range

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M5 - Expanding IP Address range

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M5 - Expanding IP Address range
Deco M5 - Expanding IP Address range
2022-05-05 19:06:04
Model: Deco M5  
Hardware Version: V3
Firmware Version: 1.57

I am wondering if it's possible on these Deco M5's to set up the DHCP to allow for more than 200 devices? We are currently running out of IPs in the DHCP for our medium-sized business. If it's not possible to extend the DHCP IP range, is it possible to subnet the Deco M5 to allow for more devices?

  0      
  0      
#1
Options
2 Reply
Re:Deco M5 - Expanding IP Address range
2022-05-06 02:11:53

  @CoryAKT 

Hi,  You could go to Deco APP>More>Advanced>LAN IP and modify the subnet mask.

Best regards.

  0  
  0  
#2
Options
Re:Deco M5 - Expanding IP Address range
2022-05-06 12:07:01

  @CoryAKT 

 

If you need an example, check this document https://www.tp-link.com/us/user-guides/deco-x20&x60&w3600_v1&v2/more-features-on-deco#ug-sub-title-1, scroll down to Modify LAN IP followed by Set DHCP Server. All you need to get an idea is in these two sections. Pay attention to Subnet Mask there. 

 

It is for Deco X-series, but that part of the document is applicable to M5, too. I am referring to that document, because similar document for M5 does not provide an example that  expands IP address range.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 883

Replies: 2

Related Articles