AX73 router, slow transfer speed to usb storage

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX73 router, slow transfer speed to usb storage

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX73 router, slow transfer speed to usb storage
AX73 router, slow transfer speed to usb storage
2022-05-28 16:34:09 - last edited 2022-06-01 07:29:28
Model: Archer AX73  
Hardware Version: V1
Firmware Version: 1.2.2 Build 20220317 rel.50456(4555)

I only get a max of 50 mb/s when transferring from my PC with a CAT 6 cable to the router, to my storage device (USB 3.0) connected to my router.

 

When I connect the USB HDD to my PC USB port I get a max of 130 mb/s transfer speed.

 

Is there a setting that I have to tick to get high speed transfer.?

 

My PC network card is set to full Duplex 1000 mbit.

  2      
  2      
#1
Options
1 Reply
Re:AX73 router, slow transfer speed to usb storage
2022-05-28 21:19:58 - last edited 2022-05-28 21:21:01

  @Rasmus_o 

 

Hi,

 

I assume you are talking about Megabytes per second.

 

If so, then I would say 50 MB/s of write performance (i.e. copy data from the PC to the USB HDD attached to the AX73) can already be considered as quite fast for a router of this price. 

 

In general, USB transfer speeds of routers are highly CPU dependent and for speeds greater than 100 MB/s you will need a CPU that is likely only to be found in somewhat more expensive routers.

 

Btw, what kind of read performance do you get from your setup? TP-Link routers tend to achieve substantially higher read speed from their USB port than what their write speed is.

 

  4  
  4  
#2
Options

Information

Helpful: 2

Views: 2114

Replies: 1

Related Articles