Home Network Community > All Threads > Connection Status : Connecting ( like a loop)
< All Threads

Connection Status : Connecting ( like a loop)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connection Status : Connecting ( like a loop)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connection Status : Connecting ( like a loop)
Connection Status : Connecting ( like a loop)
2022-07-19 21:14:04 - last edited 2022-07-19 21:17:48
Model: M7350  
Hardware Version: V4
Firmware Version: 1.0.16 Build 181220 Rel. 1116n

Hi,

After Rebooting the MIFI TP-Link M7350 to the factory defaults, it appears to me the following screen, continuously:

And as consequence I don’t have Internet Connection

The data card allocated in the MIFI, works perfectly, because I have tested in one mobile and works the connection.

DHCP server settings are:

The firmware version is:

 

And I the WIFI connection network settings of my computer,  the IP address and DNS address are get automatically regarding to the  MIFI DHCP server settings.  I have restarted several times the computer WIFI Network card, but with no success.

I would appreciate any help to solve this issue

 

Many thanks in advance

  0      
 
  0      
 
#1
Options
2 Reply
Re:Connection Status : Connecting ( like a loop)
2022-07-20 06:17:45

  @lanz80 

 

Hi, may I know who the ISP of your SIM card is?

1. Please check if the M7350 receives any 3G or 4G signal, you could check it on the screen or on the very top of the web interface

2. If 3G/4G signal is received but internet status still shows disconnected, please go to Advanced->Dial-up->Dial-up Settings page, check the current APN profile settings is correct or not, if not, you could select other profile from the list if available, or create profile manually and enter APN etc. manually.

Note: If you are not sure about the APN profile settings, please contact the ISP of your SIM card to confirm it.

 

Hope it helps!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Connection Status : Connecting ( like a loop)
2022-07-20 10:33:25

Hi  @Sunshine ,

 

Thnaks for responding

 

It´s a Spanish ISP , no problem with it.  The APN settings are OK configured

1.-  The M7350   doesnt receive the 4G signal nor 3G , in the screen. I know that when 3G/4G appears in the screen is when its running Ok.

 

Regards

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 541

Replies: 2

Related Articles
Boot Loop
558 0
m7350 v8 stuck on boot loop
1102 0
M7350 Boot Loop
1261 0
PPPOE connections status log for
564 0
Internet connection status incorrect
845 0
Connecting to a VPN with a PPPOE internet connection
3394 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.