Home Network Community > All Threads > m7350 v8 stuck on boot loop
< All Threads

m7350 v8 stuck on boot loop

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

m7350 v8 stuck on boot loop

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
m7350 v8 stuck on boot loop
m7350 v8 stuck on boot loop
2023-10-19 10:14:03 - last edited 2024-03-19 07:15:56
Model: M7350  
Hardware Version: V8
Firmware Version: unknown

Stuck in boot loop

pls help

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:m7350 v8 stuck on boot loop-Solution
2024-03-19 07:15:52 - last edited 2024-03-19 07:15:56

Hi All,

 

For such issues, please refer to this thread: Boot Loop or Boot Failure on M7350 V3/V4/V5/V6.2/V7/V8: Stuck on TP-Link Logo

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#11
Options
10 Reply
Re:m7350 v8 stuck on boot loop
2023-10-20 03:52:49

  @Ballerina 

 

Hi, if you reset the M7350 by holding reset hole for about 10s, is there any response?

Please also try removing the battery and then insert it again to see if it can be turned on properly.

 

By the way, how long have you been using this device? and is there anything special happened before the issue started?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:m7350 v8 stuck on boot loop
2023-10-20 21:09:34

  @Sunshine 

 

both those things. nothing changed. 

used for around 24hrs

had a planned power outage and the battery ran out then unable to restart since. 

  0  
  0  
#3
Options
Re:m7350 v8 stuck on boot loop
2023-10-25 02:25:58

  @Ballerina 

 

Hi, I am afraid you will need to contact the retailer or local support team to check warranty and get it replaced.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:m7350 v8 stuck on boot loop
2023-10-25 06:54:23
What about if it's out of warranty? No possibility to fix this?
  0  
  0  
#5
Options
Re:m7350 v8 stuck on boot loop
2023-10-25 09:37:11

  @SKID_72 

 

What is the hardware version of your M7350? for some older versions like V3 and V4, we could try firmware recovery, but for current V8, we don't have firmware recovery tool now.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:m7350 v8 stuck on boot loop
2023-10-25 13:40:47
Hello, I'm in the same situation, modem just switches on and TP-LINK logo appears, but nothing changes. It's a V3 (EU). Is it possible to get the firmware recovery tool for it? (just sent a private message on this). Thanks!
  0  
  0  
#7
Options
Re:m7350 v8 stuck on boot loop
2023-10-26 03:29:29

  @4Get 

 

Hi, I have replied your private message, please check if it works.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options
Re:m7350 v8 stuck on boot loop
2023-12-04 18:19:58

  @Sunshine 

M7350 v7 stuck in bootloop

Model: M7350   

Hardware Version: V7

Firmware Version: 

Tp Link text appears on the screen, but after it comes on it starts again. This way it goes on forever.

Can I boot the device in fast boot mode? In some threads, they are talking about recovery firmware/tool.

Can you share it with me? 

  0  
  0  
#9
Options
Re:m7350 v8 stuck on boot loop
2023-12-05 19:17:10

If you're experiencing issues with a specific device, like the M7350, and have followed the manufacturer's instructions for troubleshooting, it might be a good idea to consult the device's manual or contact the manufacturer's support for further assistance. They can provide specific guidance tailored to the device and issue you're facing.

  0  
  0  
#10
Options
Re:m7350 v8 stuck on boot loop-Solution
2024-03-19 07:15:52 - last edited 2024-03-19 07:15:56

Hi All,

 

For such issues, please refer to this thread: Boot Loop or Boot Failure on M7350 V3/V4/V5/V6.2/V7/V8: Stuck on TP-Link Logo

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1029

Replies: 10

Related Articles
M7350 Boot Loop
1136 0
Boot Loop or Boot Failure on M7350 V3/V4/V5/V6.2/V7/V8: Stuck on TP-Link Logo
2572 0
Boot Loop
529 0
deco x55 is stuck in a boot loop
598 0
M7350 V7 stuck in bootloop
478 0
M7350 v4 stuck in bootloop
8539 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.