Continuous 3G4G DEBUG Notification
Continuous 3G4G DEBUG Notification
Hello.
When checking logs I noticed this notification cluttering up everything. I have no 3G nor 4G modem so I don't know why is this notification there in first place.
What does thos message mean? How do I turn it off?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Please update and install the latest official firmware on the Archer C6U, then monitor if there are still those 3G/4G debug logs:
https://www.tp-link.com/support/download/archer-c6u/#Firmware
- Copy Link
- Report Inappropriate Content
Please update and install the latest official firmware on the Archer C6U, then monitor if there are still those 3G/4G debug logs:
https://www.tp-link.com/support/download/archer-c6u/#Firmware
- Copy Link
- Report Inappropriate Content
@Kevin_Z How do I make a backup of original firmware before upgrading to newest version?
- Copy Link
- Report Inappropriate Content
You can go to System Tools > Backup & Restore > Backup.
While I'm not sure if you can import the backup file into the new firmware. You can give it a try if you need to do that.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I want to backup firmware.
- Copy Link
- Report Inappropriate Content
If the current firmware on your C6U is 1.0.4 Build 20201230 rel. 53346, you can download and save the firmware file from the TP-Link official website:
https://www.tp-link.com/support/download/archer-c6u/#Firmware
- Copy Link
- Report Inappropriate Content
@Kevin_Z I see no firmware on that page that matches 1.0.4 Build 20201230 rel. 53346 (4555)
- Copy Link
- Report Inappropriate Content
You can verify that by the numbers after the Build, Archer C6U(EU)_V1_201230 should be the 1.0.4 Build 20201230 rel. 53346 (4555) that you are looking for.
BTW, which website are you visiting? If you are from Israel, please visit the local website, which is the same as the global website: https://www.tp-link.com/en/support/download/archer-c6u/#Firmware
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Are you connecting to any VPN? If you are taken to the US website, it's probably that you have an IP address on your gateway that is recognized as an IP address from the US. You can find a global icon on the top-right of the TP-Link website, where you can see Worldwide / English, you can click on that then choose Israel, you will get the local website.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Russia works, Australia works etc. Israel directs me to Global/EN website.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1296
Replies: 11
Voters 0
No one has voted for it yet.