Home Network Community > All Threads > 3G4G DEBUG [1582] backup: switch network to WIRED
< All Threads

3G4G DEBUG [1582] backup: switch network to WIRED

3G4G DEBUG [1582] backup: switch network to WIRED

3G4G DEBUG [1582] backup: switch network to WIRED
3G4G DEBUG [1582] backup: switch network to WIRED
2024-09-10 19:50:47 - last edited 2024-09-21 08:31:28
Tags: #Network Connectivity
Model: Archer AX73  
Hardware Version: V1
Firmware Version: 1.3.6 Build 20240407

Hello,

 

My internert keeps cutting out on my wired and wireless devices. The router displays an orange light while the internet is out then a short while later turns green and the internet is working again. It appears to happen randomly, sometimes only occasionally, sometimes it's multiple times in a day. It's becoming quite annoying and I would like a fix for the issue.

 

My system log show this when it occurs: 

 

2024-09-10 20:02:24 Led Controller INFO [1161] Start to run WAN1_ON

2024-09-10 20:02:24 Led Controller INFO [1161] Start to run WAN0_OFF

2024-09-10 20:02:24 Led Controller INFO [1161] Start to run LAN_ON

2024-09-10 20:02:19 3G4G DEBUG [1582] backup: switch network to WIRED.

2024-09-10 20:00:53 Led Controller INFO [1161] Start to run WAN1_OFF

2024-09-10 20:00:53 Led Controller INFO [1161] Start to run WAN0_ON

2024-09-10 20:00:53 Led Controller INFO [1161] Start to run LAN_ON

2024-09-10 19:42:56 Led Controller INFO [1161] Start to run WAN1_ON

2024-09-10 19:42:56 Led Controller INFO [1161] Start to run WAN0_OFF

2024-09-10 19:42:56 Led Controller INFO [1161] Start to run LAN_ON

2024-09-10 19:42:54 3G4G DEBUG [1582] backup: switch network to WIRED.

 

It repeats this going back months. To avoid a wall of text I haven't included it all.

 

I'm not using any range extenders and my easy mesh is switched off. I don't have anything in the USB port and I'm using a Cat6 cable from my modem to router. I can provide more information if needed.

 

Thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:3G4G DEBUG [1582] backup: switch network to WIRED-Solution
2024-09-11 09:23:05 - last edited 2024-09-21 08:31:28

  @343GuiltySpark 

Hi,

 

Please change the DNS settings on the router.

How to Change the DNS servers on the wireless router and DSL modem router (New UI)

 

And please also use the wired device to test the internet from the front device and check if it is stable or not.

If it can get a stable connection, you can also do MAC clone on your router.

How do I configure MAC Address Clone on my TP-Link Archer Router?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:3G4G DEBUG [1582] backup: switch network to WIRED-Solution
2024-09-11 09:23:05 - last edited 2024-09-21 08:31:28

  @343GuiltySpark 

Hi,

 

Please change the DNS settings on the router.

How to Change the DNS servers on the wireless router and DSL modem router (New UI)

 

And please also use the wired device to test the internet from the front device and check if it is stable or not.

If it can get a stable connection, you can also do MAC clone on your router.

How do I configure MAC Address Clone on my TP-Link Archer Router?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:3G4G DEBUG [1582] backup: switch network to WIRED
2024-09-28 16:13:04

  @Sunshine I've changed the DNS settings and been checking the logs over the past couple weeks. I still get the [1582] code but no loss of internet that I've noticed. 

 

Are there any other troubleshooting methods we can try before I attempt the MAC address clone? I'd like to avoid having to reconfigure my network and homelab if this proves unsuccessful.

  0  
  0  
#3
Options
Re:3G4G DEBUG [1582] backup: switch network to WIRED
2024-09-29 01:30:13

  @343GuiltySpark 

Hi,

 

If the internet works normally after then, you do not need to worry about the logs.

And you can continue to monitor whether the network is stable. If it is working fine, there is no need to do MAC clone.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 336

Replies: 3

Tags

Network Connectivity
Related Articles
Excessive "3G4G DEBUG [10014] backup: switch network to WIRED."
317 0
Continuous 3G4G DEBUG Notification
1292 0
Archer AX73 v1 log full of "switch network to WIRED"
1423 0
wired network name
493 0
LAG + 2nd switch causing network loops
245 0
AX73 Backup and Restore
155 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.