Archer T6E "Can't connect to this network".
Hello,
I bought Tp-link Archer T6E week ago. I can't connect to my home network from time when i mounted this in my PC. I changed channel of Wi-Fi on my router(Tp-link WR841N) - it fixed problem for short time. Next i have done everything from this: https://community.tp-link.com/en/home/forum/topic/204498 and nothing helped from this. I can connect to my mobile hotspot from phone(Xiaomi Redmi note 9) and in this network everything works fine. For example, i can connect to home Wi-Fi trough Tp-link WN823N without any problems and it's working fine.
Please help me.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Fixes for ‘Can’t connect to this network’:
Uninstall your network adapter driver
Update your network adapter driver
Disable 802.1 1n mode of your network adapter
Reset your router
Greeting,
Rachel Gomez
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @jendrula1337
Thank you for starting a new thread.
It's good to know you have tried chipset driver for Archer T6E listed in this thread and try to delete the Wi-Fi profile and reconnect to the 2.4Ghz Wi-Fi network.
You could also adjust the Wireless security to WPA/WPA2-PSK and see if that makes any difference.
For a test, try to a Guest Wi-Fi network without password and see if T6E could connect to it?
May I know did you recently update the Windows version? To better assist with your case, we will also create a support email TKID220837581 please check your email inbox later.
- Copy Link
- Report Inappropriate Content
@Solla-topee Hello!
Problem looks like: When I start PC, sometimes i can't connect to my Home Wi-Fi, sometimes i can. But I can always connect to my phone hotspot without any problems.
Sometimes when i can connect both networks, and i'm starting to use hotspot, when i try to change network to home Wi-Fi i can't, i'm getting "Can't connect to this network".
I'm using WPA2-PSK on my router.
I tried to make Guest Wi-Fi. When i made, i was able to connect both networks - secured and guest.
Sometimes when i leave PC doesn't connected to any network, when i come i'm able to connect home wi-fi.
It's must have for me to be able to jumping betwen this networks without any breaks.
I'll try to reinstall drivers again.
- Copy Link
- Report Inappropriate Content
@Solla-topee I tried to reinstall again, but it don't help.
I can't connect to guest and secured Wi-Fi.
This is my router wi-fi settings:
- Copy Link
- Report Inappropriate Content
So, what now?
- Copy Link
- Report Inappropriate Content
Hello @jendrula1337
Thank you for more test, if the adapter have trouble connect to Wi-Fi network every time you reboot the PC.
- Try having the "Allow the computer to turn off this device to save power" option disabled
Adapter Properties settings> Power Management tab> Uncheck "Allow the computer to turn off this device to save power" box
If still the same, I suspect it can be the adapter have some issue working with certain PC motherboard, you may reach retailer to check the warranty, its better to exchange to different model. If the retailer can not help, kindly reply to the support email TKID220837581and our support will follow up your case further.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1138
Replies: 7
Voters 0
No one has voted for it yet.