Home Network Community > All Threads > Access point guest network
< All Threads

Access point guest network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access point guest network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access point guest network
Access point guest network
2022-11-16 10:43:26 - last edited 2022-11-16 15:55:25
Tags: #Access Point Mode #guest network
Model: Archer AX10  
Hardware Version: V1
Firmware Version: 1.3.1

I have an Archer AX10/AX1500 set up as an access point. In the wireless settings there is a guest network option, which I would like, to enable guests to connect to the internet without opening up my network.

However, when connected to the guest network, I have full visibility of the main network, which seems a bit pointless.

TP Link's onine guide mentions advanced options, which aren't available in access-point mode.

There is a small section called Access Control, but disabling this does not resolve.

Any advice? Is the guest network pointless in access-point mode?

Thanks,

Matt

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Access point guest network-Solution
2022-11-16 12:34:30 - last edited 2022-11-16 15:55:25

  @matt216 

 

That's a known limitation - check this thread to see why's that. Here's the difference between access point and router mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options
2 Reply
Re:Access point guest network-Solution
2022-11-16 12:34:30 - last edited 2022-11-16 15:55:25

  @matt216 

 

That's a known limitation - check this thread to see why's that. Here's the difference between access point and router mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options
Re:Access point guest network
2022-11-16 15:55:14

  @terziyski hmm as I understand it, if an access point were to perform network segregation then it wouldn't know how to direct clients to the gateway. OK. I wonder why the feature is offered at all in AP mode. Seems all it does is generate another set of wifi credentials.

 

I thought that home routers didn't actually segregate the network. i.e. not a different subnet. I thought that they just kept track of clients connected to the guest SSID and prevented ping, network discovery, etc, but (crucially) provided a route to the internet.

 

Ah well. Thanks for the response.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1962

Replies: 2

Tags

Access Point Mode
guest network
Related Articles
Isolated Guest Network in Access Point Mode
717 0
Problem with access point mode
493 0
Archer A5 Access Point
483 0
AX10 as access point, no wireless internet, wired works
882 0
Access point mode Archer AX10
2064 0
Guest Network and access monthly report
1144 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.