Home Network Community > All Threads > 2 wifi extenders but only 1 works
< All Threads

2 wifi extenders but only 1 works

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

2 wifi extenders but only 1 works

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
2 wifi extenders but only 1 works
2 wifi extenders but only 1 works
2022-11-23 22:35:25
Model: RE215  
Hardware Version:
Firmware Version:

So I had 1 that worked well and wanted another for a seperate spot of my house.

But now after configuring them only 1 will work at a time.

My connection is modem to switch to extenders. In tether mode.

they are not daisy chained but each direct to the switch.

Can I not have them both working at the same time in tether mode?

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:2 wifi extenders but only 1 works
2022-11-24 11:35:45

  @depotdevil 

Hi, welcome to the community.

Here"My connection is modem to switch to extenders. In tether mode", do you mean the 2*RE215s are wired to the network switch via Ethernet cables?

May I know the model number of your ISP modem router?

When they are both powered on, Will you be able to see both 2.4ghz/5ghz lit up on both RE215s?

Wait for your reply.

Best regards.

 

Deco Monthly Recap- Check What's Currently Going on With Deco Deco X50/X55_V1_1.6.0 Open for Test! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:2 wifi extenders but only 1 works
2022-11-24 13:37:36

  @David-TP 

 

Thanks for the welcome. Love the product.

Not sure of model. It is a Arris gateway in bridge mode from Comcast. has my internet/phone on it. Weird little tower thing.

No label other than "Property of Xfinity"

When I had them powered on I was able ot see the lights and in the app I could see them.

But only worked for about 15 min. then my internet started going wonky.

I found that for some reason only 1 would stay in tether mode at a time.

And it would flip back and forth as I tried to put them both in tether mode.

I double checked and the line is running from Switch to tplink. and a 2nd line from switch to tplink.

 

The only light that wasn't on all the time or was orange was the wifi light. 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 328

Replies: 2

Related Articles
2 wifi networks on 1 deco
1527 0
2 Routers 2 Modem 1 Network?
101 0
Wifi extender
276 0
2 extenders
784 0
2 Extenders
1041 0
Internet works but no wifi
701 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.