Is it possible to monitor DSL downstream errors through SNMP or CWMP?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Is it possible to monitor DSL downstream errors through SNMP or CWMP?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is it possible to monitor DSL downstream errors through SNMP or CWMP?
Is it possible to monitor DSL downstream errors through SNMP or CWMP?
2023-01-21 13:31:36
Tags: #DSL
Model: Archer VR400  
Hardware Version: V3
Firmware Version: 1.5.0.0.9.1

Is it possible to monitor DSL downstream errors through SNMP or CWMP? I was not able to identify this using the SNMP browser. Thank you for your help.

 

 

  0      
  0      
#1
Options
1 Reply
Re:Is it possible to monitor DSL downstream errors through SNMP or CWMP?
2023-01-23 20:58:50 - last edited 2023-01-23 21:46:24

  @Fool01 

 

If that is implemented in the current FW version using SNMP and a MIB browser you should be able to read these values - part of the standard ADSL-LINE-MIB with

OID .1.3.6.1.2.1.10.94.1

DSL Downstream Errors - Loss Of Framing - .1.3.6.1.2.1.10.94.1.1.6.1.1
DSL Downstream Errors - Loss Of Signal  - .1.3.6.1.2.1.10.94.1.1.6.1.2
DSL Downstream Errors - Loss Of Power   - .1.3.6.1.2.1.10.94.1.1.6.1.4

Here's a reference - https://www.oidview<dot>com/mibs/0/ADSL-LINE-MIB.html

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 371

Replies: 1

Tags

DSL
Related Articles