Home Network Community > All Threads > RE550 OneMesh missing after Firmware Update
< All Threads

RE550 OneMesh missing after Firmware Update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE550 OneMesh missing after Firmware Update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE550 OneMesh missing after Firmware Update
RE550 OneMesh missing after Firmware Update
2023-02-03 08:31:39
Tags: #OneMesh #Firmware Update #EasyMesh
Model: RE550  
Hardware Version: V1
Firmware Version: 1.0.12

I am using the RE550 with an Archer VR2100v in what used to be a OneMesh network. After the recent firmware update that added EasyMesh support the RE550 no longer shows up as a OneMesh device on the router. Did the update kill the OneMesh compatibility and thus cause a loss of relevant features? Are there any ways of mitigating this apart from downgrading to the previous firmware version?
Are there any plans for adding EsayMesh supoort to the VR2100v or will I be stuck with an old firmware on the RE550 forever?

  0      
 
  0      
 
#1
Options
2 Reply
Re:RE550 OneMesh missing after Firmware Update
2023-02-08 10:39:29

  @ppt3 

Hi, EasyMesh is backward compatible with OneMesh, like a OneMesh plus version. So when working with Archer VR2100V, they could still create a OneMesh together.

As for the EasyMersh Compatible list/roadmap, you could have a look at this link:

https://www.tp-link.com/en/easymesh/product-list/

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:RE550 OneMesh missing after Firmware Update
2023-02-17 10:03:44

  @David-TP 
Thanks for your response. I did some more research and it seems the RE550 and VR2100 do not reestablish the connection after a reboot of the VR2100 until the RE550 is restarted as well. I can't tell if this is by design and if this was also the case before the firmware update.
 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 682

Replies: 2

Tags

OneMesh Firmware Update EasyMesh
Related Articles
Wi-Fi Coverage RE550
814 2
One Mesh functionality with Archer AX 55 and RE450 or RE550
991 0
Modem-Router FritzBox! 7530 + TP-Link RE550 with Mesh
127 0
RE550 slows down to 1-2 mbps
1445 0
OneMesh with RE605X
401 0
How to set up 2 RE550 to extend wifi to garage
535 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.