Home Network Community > All Threads > Cannot Ping Past Gateway
< All Threads

Cannot Ping Past Gateway

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot Ping Past Gateway

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot Ping Past Gateway
Cannot Ping Past Gateway
2023-03-06 06:42:30 - last edited 2023-03-08 07:13:16
Model: Archer AX1800  
Hardware Version: V1
Firmware Version: 1.3.5

Hi,

 

WiFi's fine. If I plug a host via ethernet into my router, it's able to ping the gateway and members of the LAN. While DNS resolves, any IPs or FQDNs outside of the LAN (such as 8.8.8.8) return `Destination Host Unreachable`.

 

Has anyone encountered this issue in the past? Where's the best place to start troubleshooting?

 

Thanks,

Callum

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Cannot Ping Past Gateway-Solution
2023-03-07 09:31:09 - last edited 2023-03-08 07:13:16

  @Liverpool20 Thanks for getting back to me.

 

Turns out that my NAS was using an unconfigured WiFi adapter instead of the LAN cable that was plugged in.

Recommended Solution
  5  
  5  
#3
Options
2 Reply
Re:Cannot Ping Past Gateway
2023-03-07 07:37:51

@calstu 

 

Hi,

 

Are you able to access the internet when connecting to the AX1800 via LAN cable?

 

Is the host device a computer or a NAS? 

 

How about the wireless clients, are they accessing the internet fine when connecting to the AX1800 wireless network?

 

Who is your internet provider? You may try to change the DNS servers on the WAN/Internet page to 8.8.8.8 and 8.8.4.4, then reboot the AX1800 and confirm again if you can get online.

If my reply helps with the issue, please click on the arrow pointing upward. If it solves your issue, please click the star to mark it as a "Recommended Solution".
  4  
  4  
#2
Options
Re:Cannot Ping Past Gateway-Solution
2023-03-07 09:31:09 - last edited 2023-03-08 07:13:16

  @Liverpool20 Thanks for getting back to me.

 

Turns out that my NAS was using an unconfigured WiFi adapter instead of the LAN cable that was plugged in.

Recommended Solution
  5  
  5  
#3
Options

Information

Helpful: 0

Views: 323

Replies: 2

Related Articles
Cannot ping devices in local network (AX1800)
268 0
Cannot log into gateway
667 0
Cannot Ping WA801N
358 0
Ping default gateway Fail
1099 0
The dreaded ping gateway fail
739 0
Ping Default Gateway Failed
1923 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.