Disable DCHP on MR500
I'm looking to use my MR500 as a wireless access point into an existing wireless switch/ router (unifi dream machine) so do not need DHCP enabled on the MR500.
In the version of the manual I have for this 3/4G dual band router it shows going to .. Advanced > Network > LAN Settings page and in the first line for the DHCP settings, it clearly shows an enable tick box.
However, when I go to this page on my MR500, there is no tick box there at all, so there doesn't seem to be a way of disabling DHCP
Can anyone shed any light on how I might set up the router to just offer up a wired ethernet output, so I can leave the DHCP server on my dream nachine handling this aspect of the routing
thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Please see the DHCP enable box marked yellow on the following picture, it is actually the same as that on its user guide, but the picture on the user guide is not the whole page, just part of them, so it looks like on the very top but actually not, sorry for the confusion caused.
- Copy Link
- Report Inappropriate Content
Hi, may I have a screenshot of your LAN Settings page? and is the operation mode of your MR500 on 3G/4G Router mode or Wireless Router mode?
- Copy Link
- Report Inappropriate Content
@Sunshine ... thanks
Please find attached a screenshot of my LAN settings page, when set to mode is set to 3/4G Router mode
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Please see the DHCP enable box marked yellow on the following picture, it is actually the same as that on its user guide, but the picture on the user guide is not the whole page, just part of them, so it looks like on the very top but actually not, sorry for the confusion caused.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 919
Replies: 6
Voters 0
No one has voted for it yet.