modem ip address
what is the ip address of this modem 192.168.1.1 and 192.168.0.1 are not working
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
By default LAN IP address is 192.168.1.1, unless it has been changed afterwards. Try using http://tplinkmodem.net when connected directly (wire or wireless) to the modem.y
If nothing helps - reset to factory defaults and try again:
"With the modem router powered on, press and hold down the WPS/RESET button for about 8 seconds until all LEDs turn off momentarily, then release the button."
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If you use TD-W8961N in bridge mode this is a known behaviour. Depending on your router adding a static route can resolve this - check this conversation.
If you want to use TD-W8961N as a modem router, you shouldn't configure bridge (modem only) mode. If you have an additional router, then TD-W8961N can be set in bridge mode and you could try setting a static route on the router so TD-W8961N WebGUI be accessible.
Keep in mind that TD-W8961N is a wireless ADSL modem router, it can't be used as a Wi-Fi router.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 763
Replies: 5
Voters 0
No one has voted for it yet.