how connect ER605 to 3 sg1024de switches
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
connect using ROAS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP Hi can i connect the er605 in the following way?
the wan is fine. can i configure 6 vlans on wan/lan2 wan/lan3 and lan ports then each of these ports connect to a sg1024de switch each.
or do i only use the one lan port on the er605 with all vlans configured then connect to a small sw say 5 or 8 ports then 3 ports to the 3 sg1024de.
thanks for your assistance.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
Can I have more details about your current issue? Here "ROAS", do you mean ROAS (Router-On-A-Stick) for inter VLANs communication?
Ii is suggested to refer to this link for more details:
https://www.tp-link.com/en/support/faq/788/
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Hi can i connect the er605 in the following way?
the wan is fine. can i configure 6 vlans on wan/lan2 wan/lan3 and lan ports then each of these ports connect to a sg1024de switch each.
or do i only use the one lan port on the er605 with all vlans configured then connect to a small sw say 5 or 8 ports then 3 ports to the 3 sg1024de.
thanks for your assistance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 583
Replies: 2
Voters 0
No one has voted for it yet.