Roaming doesn't seem to work or takes ages
Roaming doesn't seem to work or takes ages
Hi, The roaming feature doesn't seem to be working well with my PX50 mesh for a number of devices.
For example I have two deco PX50's in the house and one in the garage so I can get wifi in the garden (in theory). Problem is the roaming doesn't seem to be working and the devices will hang on for dear life to the deco units in the house once I go outside giving internet speeds too low to even watch a youtube video.
This is verified using the deco app and I can see which access point the device is connected to.
If I toggle on/off the wifi on the device such as a phone or laptop then they will connect to the nearest deco unit same when going back into the house. It only seems to switch over on it's own when the connection is lost.
Fast roaming is turned on in the app.
Will there be a firmware fix or option in future to change the behavior of fast roaming so it's more likely to tell the client device that a closer access point is out there? Does being in access point mode vs router affect it?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Two things you can do in regard to smartphone (not) connecting to WiFi5:
1. Enable Guest Network (if it is disabled), configure it without password and with only 5GHz, see if smartphone can connect to WiFi5 open network SSID.
2. If it does not, power off all Satellite Deco, leaving just Main Deco running. In close proximity to Main Deco, see if smartphone can connect to passwordless WiFi5 Guest network.
If that does not work, you have the following: "smartphone can't connect on WiFi5 to standalone WiFi router (no mesh) even with open network (no password)." That you should take to blackview support forums.
--------------------
In regard to powerline connectivity. Yes, you are not the only one who reported the issue with PX50. This is new TP-Link product using different powerline protocol than older powerline adapters.
Which means, issues possible. If you can wait (unknown amount of time) till possible fix, just keep checking this forum for updates and beta firmware. Which might take long time to be released.
If you can't wait, follow my recommendation with standard powerline adapters. On top of that, if you are considering to try different WiFi mesh brand, same applies: find brand that supports Ethernet backhaul and connect its WiFi mesh units through standard powerline adapters.
That solution expands options you have with powerline tremendously. You are no longer limited by just poweline capable WiFi mesh units.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 3516
Replies: 11
Voters 0
No one has voted for it yet.