TP-Link Archer AX10 channel change
Hi All,
Recently I bought an Archer AX10, apparently, i realize my device will keep reconnecting to the router, it is not periodic and it happens randomly.
After investigating, I found two causes to it.
First, the router will automatically change channel and the router's air packet changes according to the channel, so my device is able to detect the changes and had to reconnect to router.
Second, the router will automatically change channel and the router stops sending air packets (e.g., Beacon Frame) for a short period of time (but doesn't seem to had reboot), my device will disconnect since it could not detect the router, only after router starts sending air packets again, my device will reconnect to it.
My question is that the consistently changing of channel behavior is it correct, as it will affect the connection of all connected devices.
Is the solution to change the channel settings from "Auto" to any channel?
I didn't try to update the firmware to see if the issue has been resolve on latest firmware. But which firmware should I update to?
Thank you.