Home Network Community > All Threads > Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
< All Threads

Solution Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616

123

Solution Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616

SolutionLink Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-08-07 07:55:14 - last edited 2023-09-27 08:11:47
Tags: #Official #Link Aggregation
Model: Archer AX73  
Hardware Version: V2
Firmware Version: 1.0.8 Build 20230616

This Article Applied to:

Archer AX73_V2_1.0.8 Build 20230616

 

Issue Description:

After updating the firmware of your Archer AX73 router to the latest version, 1.0.8 Build 20230616, a few users have reported an issue with Link Aggregation no longer functioning properly, including both LACP and static LAG. This issue is typically characterized by the client device failing to acquire a valid IP address after the Link Aggregation setting has been configured.

 

Available Solutions:

We have identified the issue reported earlier, the solution will be included in our upcoming official release.

In the meantime, we recommend installing the beta firmware version below to solve the Link Aggregation issue:

Archer AX73_V2_1.0.11_20230926

 

Note:

1) Before proceeding with the installation, please take a moment to read and understand our Beta Firmware Agreement.

2) This beta version is compatible with both the EU and US versions of the Archer AX73 router.

 

If you have any further issue after installing the beta firmware, feel free to let us know. We're here to help!

 

Related Article

How to configure link aggregation on TP-Link Wi-Fi products

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  4      
 
  4      
 
#1
Options
24 Reply
Re:LACP of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-08-07 09:16:37

  @Sunshine Hello.

 

I can confirm that this beta update solves the issue with both LACP or Static LAG IP thing. Thanks.

 

 

So, when the official update releases, my router will download it or do I have to upload the update manually?

  0  
  0  
#2
Options
Re:LACP of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-08-07 20:33:17 - last edited 2023-08-07 20:35:16

  @Sunshine 

 

This beta firmware works for me too. LACP and Static LAG work as expected. 

I am going to keep an eye on this firmware for any kind of problems met in the following days and report asap.

Thank you!

  0  
  0  
#3
Options
Re:LACP of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-08-08 01:21:19

  @Fearlipe 

 

Hi, thanks for the update, glad to hear that it works now.

For future firmware update, when new official firmware releases, you will be able to detect the new firmware on Online Upgrade part, you could just click Upgrade button to update the firmware. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  2  
  2  
#4
Options
Re:LACP of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-08-08 01:22:13

  @Shai_Hulud 

 

Hi, we are very happy to hear that the issue has been resolved, if there is any further issue, please let us know.

Hope you could enjoy the internet with our product.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options
Re:Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-08-09 07:57:00 - last edited 2023-08-09 07:58:03

  @Sunshine 

 

hello, when does the official update appear related to this update ? I see that the new update, which is already beta, has been confirmed to work correctly ? what's taking so long ?

 

 

 

  0  
  0  
#6
Options
Re:Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-09-14 17:46:05

  @Sunshine Hello.

 

Today I got a new update:

 

Firmware Version:

1.0.11 Build 20230829 rel.37304(5553)

Hardware Version:

Archer AX73 v2.20 (BR)

 

And the Link Aggregation issue is back... why?

  3  
  3  
#7
Options
Re:Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-09-14 20:39:44

  @Fearlipe 

 

  0  
  0  
#8
Options
Re:Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-09-14 20:41:46

  @LordBeerus 

 

yea, I saw that... that's why I sent the message. i had to rollback to the beta firmware so I could use the link aggregation... aparently no one sent the fix to the new firmware...

  1  
  1  
#9
Options
Re:Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-09-14 20:50:22

  @Fearlipe 

 

can i install or not ?

  0  
  0  
#10
Options
Re:Link Aggregation of Archer AX73 V2 doesn't work after upgrading firmware to 1.0.8 Build 20230616
2023-09-14 21:02:08
Hey buddy... as I said, if you need the link aggregation dont install...
  0  
  0  
#11
Options
123

Information

Helpful: 4

Views: 3186

Replies: 24

Tags

Official Link Aggregation
Related Articles
Archer AX73 VPN Client doesn't work
188 0
AX73 Agregation (Static LAG)
256 0
Get Synology NAS work well with Archer AX6000 when Link aggregation enabled
10853 5
AX73 Link Aggregation not working?
1631 0
New update for Archer AX73 V2 EU
940 0
Archer AX73 V2 EU it has no virtual server ?
502 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.