Home Network Community > All Threads > Configuring fixed topology
< All Threads

Configuring fixed topology

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Configuring fixed topology

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configuring fixed topology
Configuring fixed topology
2023-08-14 07:30:06
Tags: #Deco
Model: Deco E4  
Hardware Version: V7
Firmware Version: 1.5.4

I have 3 deco 1 in the bedroom, 1 for the hallway, and 1 for the kitchen

 

The Bedroom Deco is the Main deco connected to the Internet. 

 

Ideally, the Bedroom Deco should be connected to Halway Deco and the Hallway Deco to Kitchen.

 

Sometimes, the Hallway and Kitchen Deco get connected to Main Deco i.e., the Bedroom.

 

How can I configure this Fixed WiFi topology setup?

  1      
 
  1      
 
#1
Options
1 Reply
Re:Configuring fixed topology
2023-08-15 05:57:01 - last edited 2023-08-15 06:05:32

  @d1vyesh 

Hi, the current firmware of Deco E4 does not support configuring perferred topology and it is planned to be added in the future via firmware upgrades.
If possible, it is suggested to connect the Kitchen Deco via an Etherent cable to the Hallway Deco, or More the Hallway Deco closer to the Kitchen Deco and start the Kitchen Deco once to see whether it helps reselect the signal source.
Best regards.

Deco Monthly Recap- Check What's Currently Going on With Deco Deco X50/X55_V1_1.6.0 Open for Test! Try to leave a Message if urgent help is required.
  1  
  1  
#2
Options

Information

Helpful: 1

Views: 211

Replies: 1

Tags

Deco
Related Articles
Deco topology forcing
233 0
Deco E4 topology problem
303 0
Configuring fixed IP address on Deco P9
923 0
Is this kind of topology supported?
638 0
Problem configuring RE220
444 0
C64 Mesh Topology Issues
408 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.